Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.



Search tips
Showing 36 results View by: Thread Post Sort by
    Answered

  • RE: INA216: Output driving capability

    Resolved
    Hello user463911, I ran my tests with the same setup as before, except with your desired ramp up rate. Below is the result I get with the INA216 output open or basically seeing a large impedance. Below is the result I get if I place a 500 ohm resistor…
    • Answered

  • INA216: PSpice Model Error

    Resolved
    Part Number: INA216 Customer is having troubles simulating the INA216A3 with INA216A3 PSpice Model (Rev. B) using PSpice A/D OrCAD Capture 16.6 They've tried to run the example sim but are getting this issue: **** RESUMING SIM1.cir **** .END .SUBCKT…
    • Resolved
    • Answered

  • INA216: About maximum capacitive load

    Resolved
    Part Number: INA216 Hi, I'd like to confirm about maximum capacitive load for the output of INA216. Our customer's board has a low pass filter, R=1kΩ and C=1nF for the output pin.Then, an oscillation problem has occurred.Should we put nothing on the output…
    • Resolved

  • INA216: Lowest current measurement

    TI Thinks Resolved
    Part Number: INA216 Hello, We need to measure current from 25mA to 2A. Accuracy of 3 to 5mA. Wondering what is the minimum current INA216 can measure? What would be the better gain (25 or 50)? Thanks, Mahesh

  • INA216 Gain error question

    Other Parts Discussed in Thread: INA216 Dear Sir, My customer has question about INA216 gain. Why INA216A4 (Gain = 100) has better gain error performance than INA216A3 and A2? Higher gain might have higher gain error? Doesn't it?
    • Answered

  • which one will fit better INA210 or INA216

    Resolved
    Other Parts Discussed in Thread: INA210 , INA214 hi, my load is 12VDC@0.4A. i am trying to detect when the current drops to 0.3A. which one shoud i choose. of course i wish to be cost effective.
    • Resolved
    • Answered

  • Long-term stability of the INA216

    Resolved
    Other Parts Discussed in Thread: INA216 We are considering the INA216 current measurement applications of less than 1% . Apart from the aging of the external resistor , Do you have any information that there how much aging of IC only ? There is information …
    • Resolved

  • Current measurement from 15uA to 5mA from a 3.6V supply - INA216?

    TI Thinks Resolved
    Other Parts Discussed in Thread: INA216 Hello, I'm looking to find a device that can measure a current from 15uA to 5mA off of a 3.6V supply I have been considering the INA216. What is the value for the min and max for Vsense on the INA216? http:…

  • RE: Request for recommendation of sensing ICs by type

    MJ, Great question! I will work to get the necessary product lines involved where I can to get you recommendations for space constrained environments. For current sensing, I would recommend having a look at the INA216, and the INA191. These devices come…
    • Answered

  • RE: INA190: Need ultralibrarian file for INA190

    Resolved
    The INA216 is now in the ultralibrarian system as well. Best, Peter

Didn't find what you are looking for? Post a new question.