Part Number: INA2180-Q1 Other Parts Discussed in Thread: CS-AMPLIFIER-ERROR-TOOL Dear expert,
Customers want to use INA2180-Q1 for high side current measurement.
Current is from 1A~30A. Current sensor resistor is 3mohm. Battery voltage is 9-16V…
Part Number: INA2180-Q1 Other Parts Discussed in Thread: INA2180 , STRIKE , OPA2192-Q1 , OPA2192 , INA2290 , INA2191 Dear expert,
Customer is using INA2180A3-Q1 for high side current measurement. Vbat is 9V~16V. Current is from 1A~30A. Current sensor…
Part Number: INA2180 Dear Team,
We have ordered TI P/N# INA2180A3IDGKR for 5# to one of our customer with having the order number 1836429 . Customer has accepted the order acceptance from TI but in status it is showing like "In process". S please…
Hey Carlo,
I am not sure what you are referring to. Are you asking if a channel of the INA2180-Q1 can independently shift a current signal from a 3.3V bus, into a voltage output signal with a full-scale range of 5V? This would be a perfectly valid use…
Part Number: INA2180 Hi Team,
For current shunt monitors like the INA2180, if one of the channels were not used for some reason, should the unused amp be left floating, GND'ed, or shoudl it be configured differently?
Part Number: INA2180 Hi, I'm close to cutting a PCB which uses your INA2180 product.
The product description describes it as a;
8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
The datasheet indicates it is a 3x3 with 0.65mm pitch. Either way, none of these are VSSOP…
Part Number: INA2180 Other Parts Discussed in Thread: INA240 Hi team,
My customer is looking for a current sensing to detect an AC motor (220VAC side). Current is 0A - 2A.
If we want to do with shunt based, any recommendation? If we want to do it…
Hi Jared,
Since you are internal to TI, you should be able to see the person assigned on this post. He should be able help you by sending you the request page that you need to fill out internally. So please contact him directly if he has not reached…
Part Number: INA4180-Q1 Other Parts Discussed in Thread: INA4180 , INA2180 Hi team,
I want to make sure if INA4180 can meet the spec requirements of DRV8718 current sensor amplifier as below. The customer want to find 2/4 channel auto current sensor…
Part Number: TPS63700 Other Parts Discussed in Thread: TPS3700 , INA2180 I am using the TPS63700 to generate a negative supply in a manner that relies on an external, variable reference instead of the reference provided by the VREF pin of the TPS63700…
