Part Number: INSTASPIN-BLDC Other Parts Discussed in Thread: MOTORWARE , , CONTROLSUITE I had a couple questions from a customer in the Michigan area:
"I have seen TI sells InstaSPIN SW. I’m mostly interested in Simulink schematics.
Do you know or…
Part Number: INSTASPIN-BLDC Hello,
For Instaspin-BLDC algorithm, when the sample of winding current and generate error signal using Park transformation, it takes some finite time. when the loop applied the correction signal, the rotor angle would have…
Part Number: INSTASPIN-BLDC Other Parts Discussed in Thread: CONTROLSUITE For INSTASPIN BLDC motors, why there is a limitation in the code of R/L (resistance over inductance) must be <= (less or equal) than 10000 and how can I disable this? For InstaSPIN…
Part Number: INSTASPIN-BLDC Other Parts Discussed in Thread: CONTROLSUITE Tool/software: Code Composer Studio Hi,
I'm confused by the use of eCAN. In my UAV system, I want to use the eCAN to transmit and receive speed control command. But I find that…
Part Number: INSTASPIN-BLDC Tool/software: Code Composer Studio Hi,
I have a question about the interrupt priority setting in the application of instaSpin-foc. My system has two interrupts: the ADC interrupt and the ecap interrupt. The ADC interrupt…
Part Number: INSTASPIN-BLDC Tool/software: Code Composer Studio Hi,
I want to operate on the flash of 28027F, such as writing data to the flash and reading data from the flash. But I find that in the flash_api, I just can find how to program data to…
Most C2000 motor EVM kits support instaSPIN-BLDC, for example, DRV8312-kit, DRV8301-HC-Kit, HVMtr-Kit. Three phases voltage of motor and dc-bus voltage sampling circuit must have on the h/w board. You might find an application notes (InstaSPIN-BLDC Sensorless…
Part Number: INSTASPIN-BLDC Tool/software: Code Composer Studio Hi,
I have a problem about the start up time of my motor driving by the instaspin-foc. You may refer to the below figure.
The process of my motor start-up is not smooth.As the figure…
Part Number: INSTASPIN-BLDC Tool/software: Code Composer Studio Hi,
I have some questions about the startup process of the sensorless instaSPIN-FOC system and the Corresponding parameters setting in the InstaSPIN project.
My UAV system has four motors…
Part Number: INSTASPIN-BLDC Has Instaspin firmware been used in flight hardware in commercial aircraft. Has it been certified to DO-178C DAL B by FAA or EASA?
