Part Number: ISO1211 Other Parts Discussed in Thread: ISOM8710 HI Staff
I'm thinking of replacing the TLP187(TOSHIBA) with a TI product. Do you have any devices you can suggest?
dest regards
cafain
Part Number: ISO1211 Hi team,
Per below table in datasheet, it seems ISO1211 can drive up to 1kohm output resistance. Can put 100kohm resistor at output as pull-down resistor? Thanks.
Part Number: ISO1211 Hi team,
Understand from datasheet that SUB pin should be floating and not to connect to FGND or any other signal. Can you please share what is the reason of floating the SUB pin?
Since it is chip substrate, it would be already at…
Part Number: ISO1211 Hi team,
Could you let me know how to interpret output current rating IOH of ISO1211?
When VCC=3.3V, IOH min. is specified as -3mA.
Does it specify the maximum sink current allowed?
I don't get why sink current is specified for…
Part Number: ISO1211 Other Parts Discussed in Thread: TIDA-00319 , TIDA-00236 , TIDA-00320 Dear *,
TI has isolated digital inputs ISO1211. Does TI also has an isolated digital output IC?
If no do you have a recommended way how to design isolated digital…
Part Number: ISO1211 Hi Team,
My customer has question about ISO1211 formula. Below is IEC 61131-2 type-1 standard. For type 1, the turning point is 15V between VIH and VIL. If use our below formula, VIH is not equal to VIL. If customer want to use 15V…
Part Number: ISO1211 Hi Team,
Greetings!
We simulated using the TINA tool for our inputs AC and DC. Attached is the snapshots of the Simulation using ISO1211.
Can you please review and advise on the same.
Part Number: ISO1211 Hi Experts, Good day.
May we know what is the frequency of the carrier through the isolation barrier? and is there any data about radiated emission (electric field)? Keep safe. Regards, Josel
Part Number: ISO1211 Hi,
I'm working on a industrial input/output combination which needs to be certified for SIL level 2. For this I want to be able to test if my input is still working correctly. To do so I have the following circuit;
Now I have…
Part Number: ISO1211 Other Parts Discussed in Thread: ISO1212 , , Hi. we are wanting to make a PLC to capture digital Input from 0-300VDC. We found ISO1211 as ideal solution however for a while it is not in stock. I wanted to know if there any any other…
