Part Number: ISO7241M Other Parts Discussed in Thread: ISO7240CF The ISO7240 has a t-wake spec of 15us max. This spec is the timing from when the DISABLE pin is lowered, how long before the IN state is reflected on the OUT state on the isolated side of…
Part Number: ISO7241C Other Parts Discussed in Thread: ADS1220 , ISO7241M , ISO6741 In our design, an MSP430 and an ADS1220 communicate via an SPI isolated by the ISO7241C. This all works without any problem. Now we have changed from the ISO7241 C to…
Part Number: ISO7241M Other Parts Discussed in Thread: ISO7741 I have a few question regarding the safety limiting current parameters of the ISO7241M:
What is the exact meaning of the current named "Is" of the datasheet chapter 7.8? Is this the maximum…
Part Number: ISO7241M We have chips with marking:
1 line - 5BCHK1T
2 line - ISO 7241M
3 line - G4
I think, "5" - 15 year, "B"-november, "CH" - wafer lot.
What then means "K1T" and "G4"
Part Number: ISO7241M I am using the ISO7241M with success but now I need an ISOxxx with the EN-1 negated ( The OUT-D enebled with LOW instead of HIGH)
Is there one ?
Thank you for your help.
Paolo.
Part Number: ISO7241M Other Parts Discussed in Thread: ISO7741 Hello Team,
My Customer would like to know if theISO7241M work at DC for an unlimited amount of time or does it require periodic switching? They intend to use this chip to isolate a steady…
Part Number: ISO7241M Other Parts Discussed in Thread: ISO7231M Hi!
In your data sheet "ISO724x High-Speed, Quad-Channel Digital Isolators",
there is "The signal input pins are 5-V tolerant regardless of the voltage supply level that is used." on…
Part Number: ISO7241M The end of the E File for Underwriters Labs on PN: ISO7241MDWR indicates the part should be physically marked with the backwards UR for UL component marking.
I'm noticing there is no UL mark on the component. Should there be?
