Part Number: ISO7741-Q1 Hi team,
My customer is considering to use this device.
In the datasheet, all of the characteristics are shown in the condition of VCC1=VCC2.
Can the customer use this device in a condition like below?
VCC1=5V
VCC2=3.3V
If they…
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741 Hi,
I would like to understand better the criteria for selecting an isolating component for reinforced insulation:
If we take the ISO7741-Q1 component, there is a big discrepancy on how…
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741 , Hello E2E,
in the maximum ratings, the output current is limited to +/-15 mA.
Is this value related to a maximum peak output current value or is this an output average / rms value?
…
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741 Hallo TI Team,
For internal EMC analyzes, I need the working frequency of the ISO774.
Unfortunately I couldn't find anything about it in the data sheet or on their website.
Could you…
Part Number: ISO7741-Q1 Hi Experts,
My customer is using ISO7741F for SPI isolaiton. They use MCU to set the EN1 pin Low and High at a certain frequency(low frequency). In this application, customer found the RE test failed at around 180MHz. If trying to…
Part Number: ISO7741E-Q1 Other Parts Discussed in Thread: ISO7741 , , ISO7741-Q1 , ISO7841 Dear experts, the ISO7741 is rated for reinforced insulation for a maximum of 800V. The internal device parameters would allow a maximum working voltage of 2121V DC…
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741 , Hi
The voltage difference between VCC1 and bus voltage is 800V,
VCC2 and bus voltage is the same reference ground,
Can ISO7741 be supported?
Thanks!
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741E-Q1 Hi all,
Do we have pin to pin digital isolator with ISO7741-Q1 beside ISO7741E-Q1?
I could not find in the ti.com. Can you help me?
Thank you
Part Number: ISO7741-Q1 Other Parts Discussed in Thread: ISO7741
Hi Team,
Since some reason, customer is asking the BOM 2 BOM replace solution.
They use our ISO7741FQDWRQ1 in currently design, and this is an already MP stage project.
Please help to check…