Part Number: ISO7761 I am using ISO7761. The data sheet states the following, but I think the actual operation is different from the description. Attached is the circuit diagram and waveforms.
According to the data sheet, when VCCI is PD (<1.7V) and VCCO…
Part Number: ISO7761-Q1 Hi Expert,
My customer is facing shortage on ISO7761FQDBQRQ1. May you kindly check if we have P2P replacement for this device? No need to change the schematic/layout.
Thanks!
Ethan Wen
Part Number: ISO7761 Hi Team,
Good day! I am posting this to help our customer and find solution for their concern. Kindly help.
I am not sure whether IO denotes just the output current iof one channel or it is the total sum of all channels output…
Part Number: TMDSEMU110-U Other Parts Discussed in Thread: ISO7761 , TMS320F280049 Hello, customer want to isolate the JTAG with our ISO7761 but CCS often complains that the MCU is in Low-power mode… Error -1156)
Is there something what he has to…
Part Number: ISO7761-Q1
Hello,
We are using ISO7761FQDWQ1 digital isolator in our design.
I want to confirm below point:
In the ISO7761FQDWQ1 IC, 5 channel are forward and 1 is reverse, Considering this case:
Vcci/Vcc1 is the input power supply for…
Part Number: ISO7761 Hi, support team
My customer has the questions as follow:
Are there alternate parts for ISO7761FDW and AMC3302DWER?
Thanks so much.
Best regards, Yuki
Part Number: ISO7761 Hello,
I have a questions regarding the layout. Is it possible to place 2 of these ISO7761 back to back (top and bottom) on a 93mils thick PCB?
thank you,
-Long
Part Number: ISO7761 Dear Sir/Madam,
I would like to implement level translation with a digital isolator, ISO7761 . As the connection is to FPGA which the data rate could reach 400MHz, below are the scratch of the connection: VCCI = 3.3V ,GNDI =0V and VCCO…
Part Number: ISO7761 Other Parts Discussed in Thread: UCC12050 , ISO7820 , ISO7810 , ISO7840 , ISO7841 , ISO7842 , ISO7821 , ISO7741 , SN6505B , SN6505A Hi support team,
I am using the ISO7761 DW-16 together with the UCC12050 to isolate my voltage measurement…