Part Number: ISO7761 Other Parts Discussed in Thread: UCC12050 , ISO7820 , ISO7810 , ISO7840 , ISO7841 , ISO7842 , ISO7821 , ISO7741 , SN6505B , SN6505A Hi support team,
I am using the ISO7761 DW-16 together with the UCC12050 to isolate my voltage measurement…
Part Number: ISO7761 Hello support team.
My customer inquires ISO7761 peak surge. Datasheet top page shows "Up to 12.8kV surge capability". However, there is no spec for 12.8kV. I found that datasheet page 8 V_IOSM 8000Vpk, and the test condition is V_IOSM…
Part Number: ISO7761 Hi Team,
My customer has questions about the output polarity that he wants to know the result of below condition.
Vcci is powered with normal voltage, say 5.0V and input signal is at high level as well. And what is the output signal…
Part Number: ISO7761 Hi, team.
May I confirm that " Icc1 and Icc2 in datasheet mentioned "are for all ch of ISO7761?
Icc1 and Icc2 are the parameter for not only 1ch but also all ch included. right ?
Part Number: ISO7761 Hi TI team,
Could you provide me with certification of ISO7761DWR? Certification: VDE, CSA, UL, CQC, TUV
My customer need it for product certification.
Part Number: ISO7761 Hello team,
My customer have a question that does it violate the absolute rating of the VCC supply voltage is 3.3V and the signal input voltage level is 5V?
I think it is not allowed since the absolute input rating in this case will…
Part Number: ISO7761 Hi,
Has ISO776x series used as isolation of IPM(or gate) drive signal?
My customer is minding market experience.
Best Regards,
Kuramochi
Part Number: ISO7761 Hi,
How should be the connection if any of the channel for ISO7761 is not used?
Connected to GND, pull up or NC? both at the input and output of the related channel?
Best Regards,
Caglar
Part Number: ISO6741-Q1 Other Parts Discussed in Thread: ISO6760-Q1 , ISO7741-Q1 , ISO7760-Q1 , ISO7761-Q1 , ISO6761-Q1 Hi Im looking for alternate part for ISO6741-Q1 with 5/0, 5/1 , 6/0 or more channels Isolator. I need enable control on output. Please…
Part Number: TCAN4550 Other Parts Discussed in Thread: , ISO7761 Hi Support team
due to MUC is no CAN FD interface, my customer would like use TCAN4550 + ISO communication to achieve CAN FD interface
however, few questions need your advice
If use CAN…