Part Number: ISOUSB111 Other Parts Discussed in Thread: BQ24392 during system power up the downstream port D+/- signals do not match the upstream port. Attached are the schematic and a scope shot of what is being seen. What is the cause and what can be…
Part Number: ISOUSB111 Hi,
Good Day. If I want to measure the voltage at V1OK and V2OK, what is the ground reference?
Please advise. Thank you very much.
Best Regards,
Ray Vincent
Part Number: ISOUSB111 Hello,
are there any differences between the ISOUSB111 and the XISOUSB111?
When will the ISOUSB111 / XISOUSB111 be available in series and quantities of >100?
Part Number: ISOUSB211 Other Parts Discussed in Thread: ISOUSB111 I would like to order ISOUSB111 or ISOUSB211 samples but they are out of stock on TI website. Is there any other way I can still order these parts?
Part Number: ISO1050 Other Parts Discussed in Thread: ISOUSB111 , ISOW1044 Tool/software: Hello Team, We have a board from which we get CAN signals. We need this signal on another board which is isolated from the first board. The signals coming out of first…
Hi Takumi-san,
Thank you for reaching out.
USB 2.0 supports 3 speeds LS, FS and HS. To support USB 2.0 HS or all three speeds, ISOUSB211 is the right device to choose but if only LS/FS are needed, then ISOUSB111 can be used. Please do check with customer…
Part Number: ISOUSB211 Other Parts Discussed in Thread: ISOUSB111 Hello!
We are currently creating a design around ISOUSB211 and ISOUSB111 but cannot get the devices to work. As others have requested, it would be nice if you can review our schematic to…
Part Number: ISOUSB211 Other Parts Discussed in Thread: ISOUSB111 Hi there,
We need an isolated USB2.0 high speed (480M) user port on medical device. We are comparing ISOUSB211 with ADI ADUM3165 /3166. Here are some questions to consult. Thanks!
1. Usb…
Part Number: ISO3088 Other Parts Discussed in Thread: ISOUSB211 , ISOUSB111 Hi Everyone,
For a project I'm looking for 4kV Isolated RS485 Transceiver(MPN for reference ISO3088), 10/100 Ethernet Transceiver, & USB transceiver.
Can someone suggest…