Part Number: ISOW1050 Other Parts Discussed in Thread: ISOW3086 , Hello every one!
I am designing a front-end PCB where size and isolation are critical. To meet footprint and EMC requirements, ISOW3086 and ISOW1050 are just perfect, the only issue is…
Part Number: ISOW1050 Team,
In the ISOW1050 d/s, it says the split termination can be used in the Fig8-3 CAN BUS Termination Concepts. However, there is no test circuit, and rising/falling time parameters spcified in the d/s and EC table. Only the standard…
Part Number: ISOW1050 Hi
The customer has a question: The board uses a isow1050VDWER, but during measurement, I found that the VISOOUT voltage is only 1.6V. I added one 0.1V and one 10U diode to both VISOOUT and VISOIN, but there's still no change.…
Part Number: ISOW1050 Other Parts Discussed in Thread: ISOW1044 , We are currently considering replacing ISOW1044 with ISOW1050. For the ISOW1050 the Logic supply voltage VDDL is specified with 2.25V to 5.5V. That’s very strange, because all modern MCUs…
Part Number: ISOW1050 Other Parts Discussed in Thread: LM5169 , ISOW3080 , We require small numbers of the ISOW3080 and ISOW1050 and the buck converter LM5169 for our new BMS design. Since there is no stock to order these parts, like to get few samples…
Part Number: ISOW1050 Hi TI Team,
I am currently using ISOW1044DFMR in my existing design, where a 51-µH common-mode choke is used on the CANH/CANL side.
We are considering replacing the ISOW1044DFMR with ISOW1050DWER . I noticed that the ISOW1050…
