Part Number: IWR1443BOOST Dear sir/Madam,
When I record signal from website: https://dev.ti.com/gallery/view/mmwave/mmWave_Demo_Visualizer/ver/2.0.0/
I got the file.dat.
Please help me read the data.
Thank you in advance,
Yen
Part Number: IWR1443BOOST When the environment and evaluation board remain stable, the FFT amplitude of the echo will fluctuate significantly. What is the reason for this?
Thank you.
mohammad javad keramati said: i think this a bug of program. my question is how can i make dss.bin and mss.bin file to same file in pre_build bianry folder and upload on board?
Please follow our ccs debug guide .
The binary will appear in the "debug" folder…
Hi Yen,
first, sorry for accidentally marking your response as resolved!
second, any outputs in the vital signs lab will still work even if we aren't planning to update the lab anytime soon. Which specific outputs are you looking for?
Thank you,
…
Part Number: IWR1443BOOST Hi team,
Here's an issue from the customer may need your help:
1) The customer wants to debug the high_accuracy_14xx_MSS project using CCS. Flashed debug.bin and ran the project as shown in Figure 1 of the manual. However…
Part Number: IWR1443BOOST Other Parts Discussed in Thread: IWR1443
The following figure shows the device information of the development board iwr1443 chip obtained during debugging.
1.Does hwMajor and hWMinor represent the device as ES3…
Part Number: IWR1443BOOST Hi TI support,
When I debugged the xwr14xx_vitalSigns_lab project on Code Composer Studio 9.1.0 software, I encountered the following problems:
——————————————————…
Part Number: IWR1443BOOST As shown in the figure, the transmission antennas tx1, tx2 and tx3 are on the plane. Obviously, tx2 is different from tx1 and tx3. Assuming tx1 as the coordinate origin (0, 0), the coordinate of tx3 is (2 λ, 0), what is the…
Part Number: IWR1443BOOST I bought IWR1443Boost last summer for a detection project. 3 mouth ago, I find that the antenna are rusting and a little bit burnt. Could I know why did this happened? (Using a DC power supply (5V) to power up the board)