Search tips
Showing 2,002 results View by: Thread Post Sort by

  • RE: IWR1443BOOST: The problem of phase transition changes of different receiving antennas

    HI, there: Usually in our FMCW chirp-based application, we are looking at the range/Doppler/angle information from one frame of data or several frames of data. There is not such a stability requirement in our datasheet. Let me know if the datasheet shows…

  • IWR1443BOOST: application and development environment

    Part Number: IWR1443BOOST Other Parts Discussed in Thread: IWR1443 Tool/software: My name is Tsukada, and I am in charge of development at SAI Co., Ltd. I would like to ask for the following questions regarding the kit available from TI, which is currently…
    • Answered

  • IWR1443BOOST: Not supported in mmwave_sdk_03_06_02_00-LTS?

    Resolved
    Part Number: IWR1443BOOST Other Parts Discussed in Thread: IWR1443 , MMWAVE-SDK Tool/software: Hello, I'm attempting to get my IWR1443BOOST displaying through the demo visualizer. I haven't been able to get data or console messages to show up, so…
    • Resolved

  • IWR1443BOOST: IWR1443BOOST Antenna revisions and noise floor of the chip

    TI Thinks Resolved
    Part Number: IWR1443BOOST Dear TI/Everyone I've been trying to investigate carefully the chip and have the couple of questions: 1) On the data sheet of the IWR1443BOOST we can see that there were 3 revisions of the board. In particular, it appears…

  • IWR1443BOOST: IWR1443BOOST no reply the detect data

    Part Number: IWR1443BOOST Dear Sir I would like to ask you the following questions regarding IWR1443BOOST. I confirmed the detection operation of IWR1443BOOST using mmWavw Demo Visualizer. After that, I sent the Configuration (.cfg) File (from sensorStop…
    • Answered

  • IWR1443BOOST: There is no response from IWR1443BOOST to .cfg transmission.

    Resolved
    Part Number: IWR1443BOOST Dear Josh Thank you for responding to this question. We will respond to your confirmation and questions below. I hope that the problem will be resolved as soon as possible, thank you. Josh's confirmation and answers to questions…
    • Resolved

  • IWR1443BOOST: IWR1443BOOST no reply the detect data(send again and again)

    TI Thinks Resolved
    Part Number: IWR1443BOOST Dear Sir Watashi no shitsumon ni taishi, kaki no kaitō o uketorimashita. Sono Chū de," Do you have your debaisu in functional mode?" To iwa rete imasu. Kore wa IWR 1443 BOOST no naka ni functional mode ga hitsuyō to iu kotodesu…

  • IWR1443BOOST: Unable to separate individual Tx data from IWR1443BOOST using DCA1000EVM in TDM and BPM modes.

    Part Number: IWR1443BOOST Other Parts Discussed in Thread: DCA1000EVM I am trying to capture IQ raw data from IWR1443BOOST with DCA1000EVM. I am using MMWAVE STUDIO for the data capture in all three Tx enabled configuration, but unable to separate individual…

  • IWR1443BOOST: Communication failure between IWR1443BOOST

    TI Thinks Resolved
    Part Number: IWR1443BOOST Dear Sir I would like to ask you the following questions regarding IWR1443BOOST. When communication between the PC and IWR1443BOOST is interrupted, is the only way to release it by pressing the NRSET button or turning the power…

  • IWR1443BOOST: PC COM Port of IWR1443BOOST

    TI Thinks Resolved
    Part Number: IWR1443BOOST Dera Sir I will ask you the following three questions. mmWave_SDK_02_00_01_04 on Windows PC Install it , I connected the IWR1443BOOST to the USB port of PC, but it was not set to "Ports (COM and LPT)" in "Device Manager…

Didn't find what you are looking for? Post a new question.