Search tips
Showing 2,147 results View by: Thread Post Sort by

  • IWR1642: change XWR1843 SBL to IWR1642

    Part Number: IWR1642 Other Parts Discussed in Thread: AWR1843 , , SYSBIOS We have successfully changed AWR1843 SBL repo code to IWR1642 SBL. Successfully compiled by created separate sbl_xwr16xx.c and binary created with No Errors. But, Not able to get…

  • IWR1642: issue changing CAN SBL from AWR1843 to IWR1642

    TI Thinks Resolved
    Part Number: IWR1642 Other Parts Discussed in Thread: AWR1843 , We have successfully changed AWR1843 SBL repo code to IWR1642 SBL. Successfully compiled by created separate sbl_xwr16xx.c and binary created with No Errors. But, Not able to get the UART…

  • IWR1642: IWR1642 : custom Radar D-CAN output

    TI Thinks Resolved
    Part Number: IWR1642 https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1583168/iwr1642-can-pins-mismatch-in-iwr1642-and-iwr1642boost-design-files We made the custom IWR1642 Radar board now and Upon your input from the above forum link…

  • IWR1642: IWR1642 : could not debug in the Custom made Radar

    Part Number: IWR1642 We have developed a custom made Radar using IWR1642, the design reference from IWR1642 BOOST and we use external XDS-110 for the debugging. After we flashed the below debug binary and changed the SOP setting to Debug mode after powering…

  • IWR1642: IWR1642 : SYNCIN signal

    Part Number: IWR1642 We are developing a custom Prototype Radar from IWR1642 and we are following the reference design of IWR1642BOOST. As per the Hardware Design Checklist for IWR1642 given below, We have connected the SYNCIN signal with 100K pull…

  • IWR1642: How to setup the Initial Prototype Board that uses IWR1642

    Part Number: IWR1642 Other Parts Discussed in Thread: , UNIFLASH We are developing a custom Prototype Radar from IWR1642 and we are following the reference design of IWR1642BOOST.We are currently customising Short Range Radar application (From Automated…

  • IWR1642: CAN pins mismatch in IWR1642 and IWR1642BOOST design files

    TI Thinks Resolved
    Part Number: IWR1642 We are developing a custom Prototype Radar from IWR1642 and we are following the reference design of IWR1642BOOST. As per TI mmwave sdk CAN Driver of IWR1642, the following Pins C13 (CAN_tx)and E13 (CAN_rx) were taken out for classic…

  • IWR1642: The CANFD filter is configured in mask mode.

    Part Number: IWR1642 HI. The current CAN filters in the demo are all in list mode and can only receive the IDs that have been configured. Since my project requires receiving all the data of all IDs on the CAN bus, and the data IDs on the CAN bus are…

  • IWR1642: People counting demo

    Part Number: IWR1642 Hi Team, Our customer is looking for the IWR1642 people counting demo. According to the presentation slide below, this demonstration requires mmwave_industrial_toolbox_2_1_2. I have searched our resource explorer page but I can…

  • IWR1642BOOST: IWR1642 ES1.0 Vital Signs not working - need correct firmware

    Part Number: IWR1642BOOST Other Parts Discussed in Thread: IWR1642 , IWR6843 , IWRL6432 Hi TI team, I have an IWR1642 ES1.0 BOOST EVM. I confirmed the SDK version is 01.01.00.02 via CLI "version" command. I flashed the firmware xwr16xx_vitalSignsDemo_lab…

Didn't find what you are looking for? Post a new question.