Part Number: IWR6843AOP Other Parts Discussed in Thread: IWR6843 Hi,
Regarding the IWR6843, to collect raw data and process the data for all types of staircases, what is the efficacy that the radar will accurately plot data to detect the base of the staircase…
Part Number: IWR6843AOP Other Parts Discussed in Thread: UNIFLASH , IWR6843ISK Our team has created an application for the R4 core and DSP core. Both of these cod bases successfully run within the same code composer studio debug instance as two separate…
Part Number: IWR6843AOP Hello,
I wonder what is the maximum number of detection points that can be detected per frame on IWR6843AOP
and also, i wonder if there is a limit to the number of static points.
below is configuration.
"flushCfg", "dfeDataOutputMode…
Part Number: IWR6843AOP Other Parts Discussed in Thread: MMWAVEICBOOST , I'm trying to debug the 3D people tracking algorithm and step through the code running on the DSP, however every time the DSP stops at a breakpoint the R4 crashes. If I stop the R4…
Hi,
I'm sorry again for the delay here. We do not have anything officially that TI has developed for this DSP core. It appears that matrix addition is a just a single loop and the compiler will do a good job of optimizing it even the code is written in…
Part Number: IWR6843AOP Hello,
This topic has been discussed in various threads on this forum, yet I haven't found a satisfactory solution.
My Setup:
A custom board based on the IWR6843AOP.
OOB firmware used to utilize CAN-FD for data transfer (detections…
Part Number: IWR6843AOP Other Parts Discussed in Thread: MMWAVEICBOOST
Hello.
I used Ti's area scanner DEMO to check the tracking results through MATLAB-based visualizer.
As a result of analyzing the stored data using the area scanner, it was confirmed…
Part Number: IWR6843AOP Other Parts Discussed in Thread: IWRL6432
Hello
Is it possible to run vital moniotoring like heart and breathe on IWR6843AOP or other AOP chips? What resources are accessible to initiate the evaluation and development process?…
Part Number: IWR6843AOP The code I wrote can run well on the debugger, and the serial port also outputs data, but it cannot run when it is transferred to the chip through the debug demo. Even the cli command will not output. Has anyone encountered this…
Hi Sebastian,
Sebastian Ludwig said: Is there a reason, the startFrequency is set to 61.2 GHz at default?
I would guess that the 61.2 GHz start frequency was set to comply with older frequency regulations in the United States. The 61.0-61.5 GHz band used…