Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: AWR1642 , AWR6843AOPEVM , TEST Hi
I am trying to send out detected objects data using CAN-FD out from IWR6843AOPEVM. I have used the reference code from the project "Object data over CAN" from Automotive…
Part Number: IWR6843AOPEVM
Hello, I have IWR6843AOPEVM but in final aplication I will able to use only one UART for data and CLI. I try to simulate it so I changed in pcount3D_cli.c
changed cliCfg.cliUartHandle = gMmwMssMCB.commandUartHandle; cliCfg.usePolledMode…
Hello,
Before modifying the overhead people counting demo, have you tried running the I2C test code to verify the HW connections are correct? Have you gone through the i2c driver test program to make sure the connections are working?
"C:\ti\mmwave_sdk_03_05_00_04…
Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: AWR1843AOP , IWR6843AOP Hello
I have an IWR6843AOPEVM device. Later we decided to migrate our development to AWR1843AOP device. I used an AWR obstacle detection lab example software (ODS Demo that…
Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: IWR6843AOP I want to understand the traffic monitoring system and area scanner demo code and implement to detect moving cars using IWR6843AOP. Where I can get the information of the configuration…
Part Number: IWR6843AOPEVM
I've found that the ros driver has a tendency to drop messages, and I theorize perhaps it's related to overheating?
I've run 2 sets of data collection, only running the radar in two different mounting configurations…
Part Number: IWR6843AOPEVM Is there a way to reconfigure the program on the chip to use a non-transmitted signal instead of the transmitted signal? I want to use it for Doppler interferometry.
In other words, instead of mixing the received signal with…
Hello Thomas,
Thanks for sharing the voltage levels, However, we cannot just look at individual rails separately as it doesn't confirm that all the supplies are stable before NRESET release as per datasheet requirement.
For example, 3.3V supply is…
Part Number: IWR6843AOPEVM Other Parts Discussed in Thread: TEST , IWR6843AOP , IWR6843 hello
i wanted to know if it's possible to test the traffic monitoring lab with the IWR6843AOPEVM and which binaries i should flash the board with
i am trying…