Part Number: IWR6843ISK Other Parts Discussed in Thread: IWR6843 , Iam using Hardcode config project which by default loads the configuration and the point cloud data is pumped over XDS100 data port. I need to receive data over J5 connector pin5 (TX pin…
Hi sir,
I tried to configure through mmwavestudio software tool , but in that also DCA1000 EVM is required . So ,can you please suggest me any other software tool in which I can test IWR6843ISK-ODS without using MMWAVEICBOOST and DCA1000 EVM.
Part Number: IWR6843ISK-ODS Other Parts Discussed in Thread: MMWAVEICBOOST , I am using IWR6843ISK-ODS with MMWAVEICBOOST and burned the overhead 3D people track binary.
I want to test the overhead people count mentioned in the link ( https://dev.ti.com…
Part Number: IWR6843ISK Other Parts Discussed in Thread: IWR6843 , Iam using Hardcode config project which by default loads the configuration and the point cloud data is pumped over XDS100 data port. I need to receive data over J5 connector pin5 (TX pin…
Part Number: IWR6843ISK Other Parts Discussed in Thread: UNIFLASH , IWR6843 Hi we bought IWR6843ISK board from Digikey recently. We have made the right DIP switch connection -
Dip1 - On
Dip2 - Off
Dip3 - On
Dip4 - On
Dip5 - off
Dip6 - off
and launched…
Part Number: IWR6843ISK Hi,
i connect the BOOST boart and iwr6834isk as exhibit in the image
first i lunch selected configuration .ccxml as exhibit in the picture
I get
then i connect
and i stand on Cortex_R4_0 and Load image .xer4f
The result
what…
Part Number: IWR6843ISK Hi,
Im import OOB example from the radar toolbox.
i set my configuration % ***************************************************************
% Created for SDK ver:03.06
% Created using Visualizer ver:3.6.0.0
% Frequency:60
% Platform…
Part Number: IWR6843ISK Hi,
Im import OOB example from the radar toolbox.
i compile dss first and then mss the compiler stuck on
C:/ti/mmwave_sdk_03_06_02_00-LTS/packages/scripts/ImageCreator/out2rprc/out2rprc.exe out_of_box_6843_isk_mss.xer4f out_of_box_6843_isk_mss…
Part Number: IWR6843ISK Hi,
I run People traking example in debug mode.
after download my configuration i get error from the stack RL_RF_AE_ESMFAULT_SB
and the system go to Loader_exit()
my configuration file is attached
what im doing wring? % SDK Parameters…