Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: C2000WARE When i try to write my code into board
I encounter the problem after debug my code
it said that my board is held in reset
below is my error message
Is there anything i can do?
…
Part Number: LAUNCHXL-F280049C I am using the LAUNCHXL-F280049C card with SIMULINK and the ADCIN_C2 and it doesn't work. Here are my settings:
Channel ADCIN_C2 Settings:
And this is my program:
The input to channel ADCIN_C2 is a potentiometer between…
Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: C2000WARE when I try to establish communication with my LAUNCHXL-F280049C, using CCS v8, I get the following message:
-----[An error has occurred and this utility has aborted]------------…
Part Number: LAUNCHXL-F280049C Hi Team,
Good day! I'm posting this in behalf of the customer. Here it is.
I have the development board Launchxl-F280049C. I am trying to use can bus as a receiver and transmitter. I used two examples. can_ex1_loopback…
Part Number: LAUNCHXL-F280049C Hi there I am trying to find the I2C slave devices on the bus for my microcontroller using the function
//I2Cs connected to I2CA will be found in AvailableI2C_slaves buffer //after you run I2CBusScan function. uint16_t…
Part Number: LAUNCHXL-F280049C hello！
I run an gui composer v3 example to use graph display ADC data, I use launchxl-f280049c,.when I run the example in dev.ti.com/gc, it can display data graph, but I export to stand-alone ,it can't display .
Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: BOOSTXL-DRV8301 , , DRV8301 , DRV8320 , BOOSTXL-DRV8320RS
Hello,
I would like to use the BoostXL-DRV8301 (Rev B) on a LaunchXL-F280049C (Rev B).
In the software, I can see switches for the DRV8301…
Part Number: DRV8300DIPW-EVM Other Parts Discussed in Thread: LAUNCHXL-F280049C , , LP-AM263 , DRV8300 Hi,
reading the documentation and this thread I understand that the DRV8300DIPW-EVM needs to be connected to the LAUNCHXL-F280049C to use the programmable…
Part Number: LAUNCHXL-F280049C
Motor SDK v3.01 (FOC)
There is issue of runOffsetsCalculation() remains locked into ePWM 50% dutycycle output signals (phase A, B, C) when >3 interrupt ticks configured user.h, define shown below.
#define USER_NUM_PWM_TICKS_PER_ISR_TICK…
Part Number: LAUNCHXL-F280049C Hi
I am trying to utilize the FINTDIV on F280049C. I have selected the idiv0 and fpu32 support as processor options along with eabi. However, the division functions from stdlib.h don't seem to return results as expected…
