Hi Anthony,
Thank you for your help. Unfortunately I was unable to get the issue resolved with TMS570. I ended up buying a BoostXL DRV8301 and a LaunchXL F28027 Launchpad. I was able to control the PMSM using FOC in Matlab using the Launchpad.
Part Number: TMS320F28027 Other Parts Discussed in Thread: LAUNCHXL-F28027 Hi,
I'm working with LAUNCHXL-F28027 and I'm trying to use the SPIA peripheral with a Raspberry Pi. The issue is that it never enters the callbacks for the transmiter and receiver…
I want to make ECG machine using msp430 whose interface with ads1292 ic. which kit prefer by you. I have give ecg signal with simulator. I have 2 types of MSP430 kit-
1. msp430g2553/452
2. MSPEXP430FG4618
which kit is prefer for this work.
I have…
Hi Gautam,
After checking further I could figure out that the Chip select pin is at J2.2 on the C2000 launchpad (LAUNCHXL-F28027).
But as per the standards, the chip select pin is placed at the 3rd pin of the outermost header. Are there plans to change…
It's part of the controlSUITE download, and is located in this directory:
C:\ti\controlSUITE\development_kits\C2000_LaunchPad\LAUNCHXL-F28027\HwDevPkg
You probably want the "LAUNCHXL-F28027-SCH.pdf" file
At this point, I would suggest running your project on actual hardware to make sure it really is setup right and the code is compiled as you expected. If you do not have hardware right now, you can get an inexpensive evaluation board for $17 that has…
I'm having the same trouble, I think.
I'm new to piccolo, but have a fair amount of Arduino experience.
Windows 7.
Code Composer Studio , Version: 6.1.0.00104
C2000 Piccolo Launchpad LAUNCHXL-F28027, and F28069M (same problem with each, I believe…
Hello,
at first my setup:
Hardware: LAUNCHXL-F28027 with BOOSTXL-DRV8301 and the shipped Telco motor
IDE: Code Composer Studio 6.0.0.00190 and GUI Composer 1.0.0.201308252300 (rcp-main)
Software: I'm using a slightly modified LAB10A (sending status…
Part Number: TMS320F28027 Other Parts Discussed in Thread: C2000WARE , LAUNCHXL-F28027 sir, I am using TMS320F2802X, for giving PWM pulses to the polyphase boost converter, now I want to implement current controlled switching method so I have to use ADC…
Other Parts Discussed in Thread: CONTROLSUITE , LAUNCHXL-F28027 Hello Everyone,
I'm trying to run some SCI communication with the C2000 Launchpad for days now without any result so far.
Not even example projects are working so I really don't know…
