Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: C2000WARE Tool/software: Hello, I am encountering an issue when trying to flash my F28027F C2000 MCU. During the flashing process, I receive the following error message:
Error connecting to…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: MOTORWARE , C2000WARE , BOOSTXL-DRV8305EVM Tool/software: I have purchased LAUNCHXL-f28027f and DRV8305EVM for motor control solution.
I need help with step by step guide for running.
Currently…
Part Number: LAUNCHXL-F28027F Can anyone helped me out ! I have the new C2000 LAUNCHXL-F28027F Development board. Whenever I give the power supply(by connecting the USB cable from Laptop to Development board) the board is heating. I did not understand…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: CONTROLSUITE , C2000WARE Can anyone help me out. I installed CCS IDE 12.7.0.00007 and also Installed controlSUITE3.4.9setup. when I import GPIO Toggle from this path (C:\ti\controlSUITE\device_support…
Part Number: DRV8353RH-EVM Other Parts Discussed in Thread: LAUNCHXL-F28027F , Hello! I'm aiming to transmit a PWM signal from a different microcontroller (STM32) than the one on the LAUNCHXL-F28027F board. Initially, I attempted to connect the STM32 directly…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: LAUNCHXL-F28027 , C2000WARE The problem statement can be accessed from here . Further, the code (CCS) is #include "F2802x_Device.h"
#include "f2802x_examples.h"
#include "f2802x_epwm_defines…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: MOTORWARE , DRV8323 Hello, I am running a BLDC motor. The control is sensorless. If the motor is now driven to a stop so that it can not rotate further, the motor makes a knocking noise and jerks…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: DRV8323 Hi, I am using the DRV8323 as a motor driver alongside the F28027f to drive this motor ( https://store.tmotor.com/goods-856-RI50+KV100.html ). I've followed the setup guide that is provided…
Part Number: LAUNCHXL-F28027F Hello, Everyone.
I just wondering, where i should connect the QEP sensor from the motor Teknic 2310P using LaunchpadXL F28027F, i just cant find that pin on the microcontroller board. What the J3 for?
Thanks in advance,
…
Part Number: LAUNCHXL-F28027F Other Parts Discussed in Thread: MOTORWARE I am new to the c2000 family and recently tries to utilize the HRPWM module to get Duty cycle of 50.3% at 500KHz switching frequency with the clock seed set to 60MHz. Below is the…