Part Number: LDC1001-Q1 Other Parts Discussed in Thread: LDC1001 Tool/software: Hi all, I am using the TI LDC 1001-Q1 as proximity sensor to detect metallic objects. The LDC is connected to a Microcontroller and to an external squared coil with an inductance…
Part Number: LDC1001-Q1 Other Parts Discussed in Thread: LDC1001 Tool/software: Hi,
The datasheet says: Remote sensor placement (decoupling the LDC from harsh environments).
How far away can the LDC1001 and microcontroller be from the sensor? Does…
Part Number: LDC1001-Q1 Tool/software:
We are looking for a technology for a speed sensor for turbochargers (detecting the blades)
The electronics needs to withstand 150ºC
Single output push/pull stage
Important Low Speed requirement: Minimum…
Part Number: LDC1001-Q1 Other Parts Discussed in Thread: LDC1001 Tool/software: I've been trying to adjust a filter cap on an existing sensor (CFA and CFB pins). The datasheet says to adjust the cap until the signal on the CFB pin is 1 Vp-p. The board…
Part Number: LDC1001-Q1 Hi all, I am using the TI LDC 1001-Q1 as proximity sensor to detect metallic objects. The LDC is connected to a Microcontroller and to an external squared coil with an inductance of 220uH (inner diameter/ outer diameter = 0.86…
Part Number: LDC1001-Q1 Other Parts Discussed in Thread: LDC1001 , Hi Team,
The customer is using the inductive sensor for the Contactless Brake Switch.
The customer requests a private review of the concept.
Please let me know the mail that I can…
Part Number: LDC1001-Q1 Hi,
I am using an inductive proximity sensor based on the LDC1001-Q1. Seeing the ds however, this is not ASIL, and also has the SPI protocol output. We wanted to ask if there are ICs like the LDC1001-Q1 but with ISO26262 development…
Part Number: LDC1001-Q1
Tool/software: WEBENCH® Design Tools
Hello All,
I am working on inductive sensor.
I noticed if i change the air gap distance between the metal target and sensor coil. the Inductance of the coil changes, frequency and voltage…
Michael,
Answers for your Q1-Q3 are below. I will have answers for Q4 & Q5 by Tuesday of next week.
Q1: What LDC can give higher performance in DRDY timing mode? (if not comparable based on A1) Which metric is of greatest importance for your application…
Part Number: LDC1000-Q1 I noticed in "SNOA931 - LDC1612/LDC1614 Linear Position Sensing" that a racetrack design is suggested for linear position sensing. Figure 6 states that past the innermost turn (highest field density) the response becomes non-monotonic…
