Part Number: LDC1312 Hello experts,
Regarding LDC1312/4, in which case would single channel mode be preferred, over just using a 1CH device?
From datasheet, the only advantage I could find of single channel mode is high sensor current drive mode.…
Part Number: LDC1312 Other Parts Discussed in Thread: LDC1612 , LDC3114 Hello,
My customer has no output from the coil issue after a few hours from the power on. It happened a few days after the machines were delivered to the end customers which means…
Part Number: LDC1312
Hi,
I'm running into scenarios where new data (using the INTB pin) arrives while I'm reading the DATA registers. When this happens, will I be reading the previous data packet? I'm worried that some bits will be overwritten with…
Part Number: MSP430FR5994 Other Parts Discussed in Thread: LDC1312 , Hello everyone in MSP430 land, I have a project on a custom board. I’m using an MSP430FR5994 with an LDC1312 (inductance to digital converter) on an I2C bus (actually there are four…
Part Number: LDC1312 Other Parts Discussed in Thread: MSP430FR5994 Hello Sensor People,
I’m using an LDC1312 Inductance to Digital Converter (I2C interface 400 kHz) with an MSP430FR5994. The board has four of these converters each on its own bus, for…
Part Number: LDC1312 Other Parts Discussed in Thread: TIDA-00508 , LDC1314DIAL-EVM , LDC1614 , LDC1612 , LDC1314 Dear all,
I would like to design a 360° angle sensor using LDC1312 with 24 positions (15° step). Now I have problem for the coil parameters…
Part Number: LDC1312 Hello, My customer would like to use either SG-210STF 40.0MHz L, SG-8101CG 40.0MHz TJHSA or SG-8018CG 40.0MHz TJHSA for LDC1312 CLKIN input. I attach the datasheets of them. Could all of them be used as a CLKIN input? Though jitter…
Part Number: LDC1312 We ran into a rare instance where the sensor DATA reading will not update after running for a while. We have built many of our sensors with no issues before so this is probably a hardware issue.
Bug:
The sensor will stop updating…
