Part Number: LDC1312 We ran into a rare instance where the sensor DATA reading will not update after running for a while. We have built many of our sensors with no issues before so this is probably a hardware issue.
Bug:
The sensor will stop updating…
Part Number: LDC1312 Other Parts Discussed in Thread: LDC1101 Hi Team,
LDC1312 will be used to sense the position between sensor and metal target. The system requirements are:
1. Distance resolution is 10um.
2. Maximum distance is 2mm.
3. Sample…
Part Number: LDC1312-Q1 Other Parts Discussed in Thread: LDC1312 Hi
I am using LDC 1312 in one of our position sensor.
i got coil PCB designed from TI tool.
Position is sensed and analog output is given as a representation of position.
One failure…
Part Number: LDC1312 Hi
how can i measure distance between LDC1312 module & target metal. output should be in analog voltage form according to variation of distance between them.
The target metal distance is 1 CM - 15 CM.
Please guide me.
…
Part Number: LDC1312 Sir/Mdam,
We are using LDC1312 in one of automotive sensor.
The brief application is as below
The LDC 1312 measures the linear distance -2mm to +2mm of target metal movement. The LDC1312 is interfaced to micro controller. Micro…
Part Number: LDC1312 Other Parts Discussed in Thread: LDC0851EVM , , LDC0851 , LDC1314 , LDC1612 , LDC1614 Thank you very much for your help. I am on the verge of designing a proximity sensor using the LDC0851EVM. Please let me know the following.
1…
Part Number: LDC1312 Other Parts Discussed in Thread: LDC1612 Hello Everyone,
I have and inductor with L = 2,2mH and the capacitor to create the oscilation frequency is C = 3,3nF. The oscilation frequency is about 58000 KHz. I´m using the LDC1312…
Part Number: LDC1101 Other Parts Discussed in Thread: LDC1312 , Hello there,
I would like to ask how the measurement method differ between LDC1101 and LDC1312?
Lets say we have both devices (LDC1101 in LHR mode and LDC1312 in single channel mode…
Part Number: LDC1312-Q1 Hello Team,
customer is using LDC1312-Q1 with CLKIN=16MHz and has a sensor resonance frequency of 3.95MHz.
Is it possible to work with a deglitch filter configuration of 3.3MHz? Any concerns?
Many Thanks
Josef
