Part Number: LDC2112 Other Parts Discussed in Thread: LDC3114 , Hi Team,
I would like to check with you about following 2 questions:
Can we use 1.8V for VDD and I2C pull-up voltage 3.3V?(That's mean two different voltage rails for device)
Can…
Part Number: LDC2112 Tool/software: 1.The output DATAn registers (Addresses 0x02 through 0x09) of the LDC2112/LDC2114 contain the processed values of the changes in sensor frequencies.
What exactly does the processing value mentioned in the specification…
Part Number: LDC2112 Other Parts Discussed in Thread: LDC2114 , LDC0851 , LDC3114 Tool/software: Hello, I have an application where we check the presence of a metal target in front of the sensor LDC2112. We discovered the issue, that the sensor behaves…
Part Number: LDC2112 Hey team,
Do we have any material that helps outline how long a FULL_RESET takes on the chip? I see our power on timing requirements are 66ms and two 25ms scan cycles, but that is not tied to the RESET function on the datasheet…
Part Number: LDC2112 Tool/software: Hello,
We use the LDC2112PWR in our product, with one channel connected to a flex PCB to implement a simple touch button (the other channel is left floating).
In general, the button works as intended. However, in…
Hi Molly, Thank you for posting to the Sensors forum! Unfortunately, our inductives expert is out of office today. However, he should be back on Monday and be able to look at your question then. Best, ~Alicia
Part Number: LDC2112 Hi expert,
Is there any recommended configuration to make the LDC2112 chip work as a simple digital sensor, in case it detects the presence or absence of a metal object?
Thanks!
Best regards
Jiahui
Part Number: LDC2112 Hi TI,
We use LDC2112 as touch button application.
At beginning, our LP_BASE_INC(0x15) setting is b011(base on the LDC2112 config tool).
How about if we set BINC like LP_BASE_INC to maximum as b111?Does it has other side effects…
Part Number: LDC2112 Hello everybody,
according to datasheet the I2C-Interface of the LDC2112 allows an Input low voltage of 0.3xVDD, so 0.3x1.8V=0.54V.
Is this the min voltage to recognize a low level?
How high can the voltage level rise and the…
