Hello Ali,
The LDCCOILEVM was designed to work with multiple LDC devices. The LDC2114 has a higher frequency limit than other devices so an inductor isn't required for coil R to be used with it. You can just use a 0 Ohm resistor to populate the board…
Other Parts Discussed in Thread: LDC3114-Q1 , LDC2114 , LDC2112 , LDC3114 If I need to add illumination or cutouts in the surface of my inductive touch button, what design concerns should I keep in mind?
Part Number: LDC2114 Hello Nicole-san,
After that, I checked the operation of Excel_FEMM_v1p28.xlsm on 3 other PCs(including not only company PCs but also personal computers).
All the results were NG.
The upper window is displayed on the screen.
* Excel…
Part Number: LDC2114EVM Other Parts Discussed in Thread: LDC2114 , LDC1612 , LDC3114 Hi,
I am testing the LDC2114EVM with the Coil PCB "G" . Below is the configuration on the registers and the capacitor= 470pF .
The data streaming graph…
Part Number: LDC2114 Hello
From this version, the protection of each sheet cannot be released. A password is required to remove the protection. Will this password not be disclosed? It became very inconvenient.
Best regards
Part Number: LDC2114 Hello,
Excel_FEMM_v1p28.xlsm does not work well
It used to work fine, but after changing the PC it stopped working.
FEMM 4.2 is working fine on its own.
Open Excel_FEMM_v1p28.xlsm, leave the coil, capacitor, and target distance…
Part Number: LDC2114 Other Parts Discussed in Thread: LDC3114 Hello,
Large difference in data size between LDC_Tools-ext49 and LDC_Tools-ext50
The data size of the new version (LDC_Tools-ext50) is about 1/4 of the data size of the old version (LDC_Tools…
Other Parts Discussed in Thread: LDC2114 , LDC2112 , LDC3114 The basics of baseline tracking using the LDC2112, LDC2114, and LDC3114 are described in the LDC211x and LDC3114 Internal Algorithm Functionality app note but this FAQ will discuss how to use this…
Hi Ian,
The LDC2114 would be the most suitable device for this application. The LDC1614 would require a detection algorithm to be implemented on an MCU, and it cannot drive sensors with Rp values below 1kohm.
Best Regards,
Part Number: LDC2114 Hi Sir,
May I check with you that the data streaming (Data Codes) of GUI's graph is come from the OUT DATA(Resister 0x02-0x09)?
if not, how to get the Data Codes?
thanks~
Regards,
Drisoll