Part Number: LDC3114-Q1 Hi team,
In the LDC3114-Q1 datasheet, it is recommended multiple times that, "for optimal performance, configure the sensor frequency to be greater than 3MHz". However, it is not clear to me why we have made that recommendation…
Part Number: LDC3114-Q1 Other Parts Discussed in Thread: LDC3114 Hi TI technical support team,
Here are my questions, could you help answer? thanks.
1, Datasheet says "calculate gain factor required to increase DATAn to the programmed threshod(default…
Part Number: LDC3114-Q1 Hello-
I have found out that some prototype boards I had built were a different stackup than what I initially expected when I used the Spiral_Inductor_Designer LDC Tools excel sheet to help with my design. I wanted to go back…
Part Number: LDC3114-Q1 Other Parts Discussed in Thread: LDC3114 Dear ladies and gentlemen,
I have a question concerning the EMC and ESD protection needed for the LDC3114: In the evaluation board as well as in the datasheet, you do not show any safety…
Part Number: LDC3114-Q1 Other Parts Discussed in Thread: LDC3114 , LDC1612 Hello,
Currently I am using the LDC1662 for a linear proximity Detection. Now I need a functional safety capable device so I am interested in the LDC3114-Q1.
Now i have a question…
Part Number: LDC3114-Q1 Other Parts Discussed in Thread: LDC3114 Hello TI-Team,
Our team is working on a safety solution with LDCs. Now we have to know if one coil could be connected to two channels.
For this we want to measure the inductance twice…
Part Number: LDC3114-Q1 Hello TI-Team,
Our Team is working on a safety solution with a LDC. I want to know if there are any protections of the IIC communication like a checksum or something else is planed for future releases.
Or does an other LDC…
Part Number: LDC3114-Q1 Hi team
Customer would like to evaluate the device and they did not use it so have some questions to ask:
1. Must the metal sheet have to be deformed to be sensed? Is it possible to just move up and down to identify the displacement…
Part Number: LDC3114-Q1 Other Parts Discussed in Thread: LDC3114 Using the LDC Tools Coil Calculator Excel spreadsheet, rev1.50, I filled out the Spiral_Inductor_Designer with known application parameters then moved on to the LDC3114_Config_tool tab.…
Part Number: LDC3114-Q1 Hi,
The fit rate in the document "Functional safety information"
is different to the fit rate in the Quality, reliability & packaging data download on the homepage.
Which value should be used for a MTBF calculation? …
