Part Number: LM10524 All.
For the LM10524:
For Ioutmax, can I get the typical values?
Also is Ipeak the current level where the current limit triggers.
Thanks,
Regards,
Joe
Part Number: LM10524 Hi Sir
we use cross reference MP5505 and find out LM10524 .
but i find MP5505 is Energy Storage and LM10524 is PMIC.
May we know how LM10524 to replace MP5505?
Bogey
Hello Mahesh,
The VINxx pins support up to 5.5V max, and the VIN_IO can be as high as VIN. So I don't see any issue to provide 5V to all the input pins. And the SPI pins can support up to VIN, so this is ok as well.
Regards,
Karl
Part Number: LM10524 Other Parts Discussed in Thread: TPS65023B , TPS650231 Hi Team,
The default output set voltage for Buck-1 is 2.85V. We understand that through SPI we can program register 0x07 to change the voltage. But, we need the output to…
When in default the power supply start as:
But what can I do cause those supplies aren’t good for me ?
Cause I’m going to use Buck 3 = 1.3V, Buck 1: 1.2V, Buck 2: 1.8V.
There is a way to change default values cause 2.85 will actually burn my processor…
Other Parts Discussed in Thread: LM10524 Hi,
Could you please point me to package details for YFR 46 pin package. (http://www.ti.com.cn/general/cn/docs/lit/getliterature.tsp?genericPartNumber=lm10524&fileType=pdf)
thanks,
Anjana
Hi Brian,
Thank you for your assistance. Unfortunately, we need PMIC with the small form factor for our project. So I think the part numbers that you had given are much larger. Because of that, we think LM10524 will be better for our purpose.
Hello Brian,
Thanks your reply !
I check LM10524 also SPI interface but I still can't find SPI timing spec from D/S .
This chip still active and may I get your help to confirm SPI timing spec ?
Many thanks !
