Part Number: LM1084 i want to have my schematics designed reviewed by TI team, i really appreciate your help in advance.. assuming 5A maximum current draw.. EDISON_HMTD_A1-LDO.pdf
Part Number: LM1084 Has there been any changes made to this component since 2013? I am being told that this component has been used in the exact same circuit, loaded exactly as I am, and it did not oscillate.
Part Number: LM1084 Using a LM1084IS-ADJ as a load regulator in a circuit. 14vdc in, 0.200 ohm resistor between output and load, load sense line back to the adj pin. Load is only applied for 100 msec. Everything works fine until load gets above 6.2 amps…
Part Number: LM1084 Hello,
Several questions that I would be very grateful to have answered:
1) For the LM1084-ADJ, what is the approximate output impedance across the audio band (20Hz-20Khz)
2) The datasheet specifies an electrolytic or tantalum capacitor…
Part Number: LM1084 Hi
I'm looking for a device that can provide stable 25V output at 26.4V input, with 1.1A maximum output current for the customer's solution.
I noticed this device meets the requirement so I tried Webench design and noticed…
Part Number: LM1084 Hello Guys,
We usually received this kind of inquiry where the customer is asking which of the thermal parameters to use θ or ψ.
This time around, a customer is asking what to use, RθJC(top) value or the ψJT value for his…
Part Number: LM1084 Hello,
I am using LM1084 5.0 fixed voltage regulator . I given input ranging from 5V to 15 V , my output was supposed to be fixed at 5V but I observed that it is varying linearly with the input volate.
I have grounded pin 1, put 10uf…
Part Number: LM1084 I would like to know if it is possible to parallel two LM1084 to get 10A at 5V or would it better to use a pass transistor instead.
Thanks for the help.
Part Number: LM1084 Good morning/afternoon/evening everyone,
I am working on a design and am planning to use the LM1084ISC-5.0/NOPB regulator from Digikey. I was looking through the datasheet and noticed that the diagram on page three of the datasheet, which…
Part Number: LM1084 Hello, I am an Electrical Engineering student and would like some help with the following problem. I am using the LM1084 as an adjustable voltage regulator to output 5V at 5A as described in the datasheet. I printed a PCB to implement…