Part Number: LM119QML-SP Other Parts Discussed in Thread: LM119 Hi team,
My customer wants to know if the LM119QML-SP has a metal lid. If it does, they want to check if the metal lid is internally grounded, or provides a pad for floating, or is floating…
Part Number: LM119QML Other Parts Discussed in Thread: LM119
Hi,
I don't understand the conditions of electrical characteristics of LM119 (SNOSBJ2B) datasheet p 5.
In line 1, for Input Offset Voltage, what is the resistance Rs which is less or…
Part Number: LM119QML-SP I had a quick question about the LM119QML-SP:
Could you supply the burn-in test circuits for this part?
In particular, I need to know the input voltage(s) applied to these parts during the MIL-PRF-38535 burn-in testing…
Hello Christoph,
TI has not performed SET testing on the LM119.
Others have done so. If you search on the following title, you should be able to find an IEEE paper where max transients amplitudes were explored using laser testing:
Single-Event Transient…
Part Number: LM119QML-SP Other Parts Discussed in Thread: LM119 What is the current flowing out the GND pin when the output is off (pulled high)?
I assume some current flows to bias the internal circuits of the LM119 from V+ to the GND pin?
I am using…
Part Number: LM319-N Other Parts Discussed in Thread: LM119QML , LM119 , LM111 , LM211 Hi team,
Do we have higher temperature option over LM319 with -40-125°C？ This is because of the output is referred to GND which is required from customer side. Do…
Part Number: LM119 Other Parts Discussed in Thread: , LM319-N
Dear Technical Support Team,
According to the website, r ating of LM119(non-QML) is military grade and price is expensive such as $9.362.
Do you have general grade and lower price for…
Part Number: LM118-N Other Parts Discussed in Thread: LM119QML , LM119 Hi Team,
Good day. I am posting this inquiry on behalf of the customer.
I need to build a comparator with the op-amp LM118H. The signal bandwidth is 15 MHz. But the problem is…
Hello Pablo,
Current-feedback amplifiers have a different input structure than voltage feedback amplifiers. Their input impedance at the inverting input of this architecture is low, and shouldn't be used in a comparator configuration.
In the last…
Hello Nick,
The H in LM119H indicates the product comes in a hermetic can packags. Moisture absorbsion is not an issue for hermetic packages, so it won't have an MSL rating.
The LM119 comes in three grades. Package and order info for each grade can…
