Part Number: LM22670 Other Parts Discussed in Thread: LMR66430 Hi Team,
We're using LM22670 to implement 11V-22V input -> 6V/7.5V/9V/10.5V output with 2A IOUT.
Obviously, the 9V & 10.5V output under 11V input is impossible.
Do you have any…
Part Number: LM22670
Hi Team,
The thermal info of LM22670TJE-ADJ is stated in the other thread. Our customer is looking for the ThetaJC (top or bottom) and ThetaJB of LM22670QMR-5.0. Do they have the same details? If not, would you please share these information…
Part Number: LM22675-Q1 Other Parts Discussed in Thread: LM22670-Q1 , , LM22675 , LM22670 Team,
I'm posting this on behalf of my customer. They would like to know if the LM22670-Q1 can be used as a replacement for the LM2267 5 -Q1? It looks like the main…
Part Number: LM22673 Hi Experts,
Good day.
Due to supply shortage, our client would like to use LM22673MR-ADJ/NOPB as an alternate to the LM22670MR-ADJ/NOPB, but we're not sure if it would work as they have different pin fxn at pins 3&5.
A more…
Part Number: LM22670
Hi TI TEAM,
I would like to know the effiency of this LM22670MRE-ADJ/NOPB regulator in the low current region.
On the datasheet, the effiency curve is shown on Fig. 20, but it does not show the efficiency in the
low current region…
Part Number: LM22670 Hi team, I'd like to know about voltage for ENpin. I using ENpin with open. When I measured the voltage of EN, it was over 8V. Is it OK to exceeds the absolute maximum rating? Is the absolute maximum rating an externally applied SPEC…
Part Number: LM22670 Hi team, My customer added a capacitor and register to ENpin. This is to put in an additional soft start. Are there any concerns about this? Sincerely. Kengo.
Part Number: LM22670 Other Parts Discussed in Thread: LMR33630 Tool/software: WEBENCH® Design Tools Hi,
I now plan to using LM22670 for +12V@2A,-12V@1A when the input is 24V. But WEBBENCH can't support the simulaiton when the output is more than 5V.…
Part Number: LM22670LM22670MRX-5.0/NOPB, the output voltage should be within 4.75-5.25V, but our test result for NG parts shows 11.7V, 10.6V, we test with other good PCB still have same problem, we checked the boot capacitor and change it, this didn't…