Part Number: LM25066EVK I received a LM25066EVK - Evaluation board with a FT2232H mini module. The FT2232 comes with a 10 pin adaptor to connect to J1 of LM25066EVK. However the mini module and EVK board have reversed pinouts. Pin 1 connects to pin 2…
Part Number: LM25066EVK Other Parts Discussed in Thread: LM25066 I downloaded the TI PI Commander GUI for my LM25066 Hot Swap Controller Evaluation Board, and the file type just shows up as type "file". It is not a .zip or .exe and my computer can't open…
Hi Carlos,
Any USB to GPIO adapter, such as Aardvark I2C/SPI Host Adapter, FTDI Dongle, etc. can be used to communicate with LM25066. However, pin to pin compatibility must be ensured between the adapter and device SCL, SDA, SMBA#, and GND pins. That’s…
Part Number: LM25066
Hello I have LM25066EVK. The shunt was changed to 10mOhm ( stock 0,5mOhm) to gest 2.5A current limit at Vref 25mV. Configuration of the board is as follow: CL to GND, CB to GND, RT to GND.
Vin 12V from DC power supply limited to…
Part Number: PMBUSMGRGUI-SW Other Parts Discussed in Thread: LM25066EVK , LM25066 Hi,
I am simply looking for a way to get the GUI required to use the LM25066evk eval board. I stupidely lost the CD that was delivered with it... That SW seems not available…
Part Number: LM25066A Other Parts Discussed in Thread: LM25066EVK , LM25066 Is it appropriate to power the VDD pin with an external supply of 5.5V while the LM25066A is in normal operation with VIN = 12V?
The datasheet shows that the VDD pin can handle…
Dear Joseph,
I do not manage to download the SW you mention from there: www.ti.com/.../pmbusmgrgui-sw
Do you know any other place where I could find it ? I purchased the LM25066evk eval board over a year ago and I do not have the CD any more. I must…
Hi Yusuke-san,
They understand the correct way to do this (send the command 01h with value 00h).
If they do not see this working, then I believe it would be one of these two issues:
1. A communication problem (are they writing to the correct I2C device…