Part Number: LM2596 Other Parts Discussed in Thread: LM2595 Datasheet for LM2596 rev C SNVS124C has correct absolute maximum table for the part.
Since rev D and onwards, the table is for the wrong part.
Current rev G continues to serve the wrong information…
Part Number: LM2596
Does this device has minimum output current?
I have heard that old DCDC sometimes has minimum output current to make it stable. Does this device has such minimum output current to operate in a stable condition?
Part Number: LM2596 Hi team,
From the internal block diagram, it seems that LM2596T-12 doesn't have a feed forward capacitor. Is this device stable without Cff? Is the system is unstable, what should the customer do instead?
Part Number: LM2596 The schematic in the datasheet for a negative voltage power supply does not seem to work. Please advise.
I am using a SS34 diode for both D1 and D2 and just a standard diode for D3. I'm using a 100 uF cap for CIN. I have checked the…
Part Number: LM2596 Other Parts Discussed in Thread: LMR14020 Hi TI experts...
I have a design with these parameters:
Vin = 12 V
Vout = -12 V
Iout = 3 A
Is this component recommended to make this voltage inversion? I already did it but when I put a load…
Part Number: LM2596 Hello,
I am looking to build a cheap and simple non-isolated, completely transform-less, AC to DC converter using the LM2596. To do this, I am thinking to add a PFC converter as a front end to the LM2596.
Can any one suggest a suitable…
Part Number: LM2596S-ADJEVM Hi,
I have a design using the LM2596S-ADJ to output 5V to an IoT device.
After a couple of days of being connected the output voltage goes from 5V to 0V and remains at 0V.
We have two versions of the board (ver 2 and v3), on…
your last response is very useful; if the suggested SS circuit could solve my problem in a new PCB revision, it's nevertheless a solution.
I will definetly test this
Thank you for your suggestion