Part Number: LM26480SQ-AAEV Buck1 of LM26480SQ-AAEV is according of the datasheet only designed for an output voltage of 2 V. Nevertheless the part works well with a 3.3V output voltage in the complete temperature range. May be it is valid if only a small…
Part Number: LM26480SQ-AAEV Other Parts Discussed in Thread: LM26480 Hello,
I was testing the LM26480 eval the other day and I found it weird that the EN logic voltage input threshold is different from the datasheet:
CH1 (Yellow): Vin, CH2 (Magenta…
Part Number: LM26480SQ-AAEV Other Parts Discussed in Thread: TPS65321A-Q1 , LM26480 HI,
I need use only one buck and LDO channel of LM26480SQ, and I want to disable unused ones by connecting ENSW2 and ENLDO2 to GND.
in this way will npor go high when…
Part Number: LM26480SQ-AAEV Other Parts Discussed in Thread: LM26480 , TPS65320-Q1 , TPS65321A-Q1 Hi,
can the IC support spike of 20V?
If no, is there an equivalent IC with input voltage greater that 20V?
Thanks.
Best regards.
Giuseppe
Part Number: LM26480 Hello, I have a question about the input capacitor requirements for the buck regulators of the LM26480. The minimum capacitance is 10uF as given in section 7.7 of the datasheet. The application circuit in Figure 26 uses 10uF capacitors…
Part Number: LM26480-Q1 Other Parts Discussed in Thread: LM26480SQ-AAEV , Hello,
When using the LM26480SQ-AAEV evaluation board and also in the implementation of my design, I observe the following:
Using an input voltage of 3.3V and with the ENLDOx…
