Part Number: LM2674 Hi,
Good Day.
The customer is also for an alternative solution for the currently out-of-stock LM2674N-5.0. Requirements are fixed 5V output and should be in the same PDIP package. He also wants to know the possibility of using the fixed…
Part Number: LM2674 Hello,
We use the LM2674M-3.3 to supply micro-controllers in our products. We recently had failures at power-up resulting in blowing IC connected to the 3.3V rail (IC in short circuit). The attached pdf contains the schematic of the…
Hi,
Since it's been more than two weeks on this thread with no response, I will mark this as closed. Please reopen if support is still needed.
-Richard
Part Number: LM2674 Other Parts Discussed in Thread: LM2672 Hello
The part LM2674 shows a wrong housing on your website and as well on the datasheet:
Website:
Datasheet:
Datasheet housing drawing:
But when you order the part, you get the size according…
Part Number: LM2674 Other Parts Discussed in Thread: LM22674 , LMR50410 , LMR33610 Looking to make a pair of adjustable output voltage buck regulators (from a microcontroller)
Vin = +24v, Vout = +10 to +18v, Iout = 100mA (max.), AND separately
Vin = -24v…
Part Number: LM2674 Other Parts Discussed in Thread: LM2671 , LM22675 , LM22672 We have several designs using the LM2674MX-5.0 and this part seems very difficult to source at the moment. I am looking for an alternative part pin to pin compatible which could…
Part Number: LM2674
I'm trying to determine whether to connect the No Connect pins (pins 2 and 3 on the SOIC version) to ground, or leave them floating. The Pin Function chart just says "No connect pins". However, the Layout Guidelines section implies…
Part Number: LM2674 Hi QA Team, We bought this part LM2574M-5.0/NOPB and random test for the X-Ray and found one part with Broken Bond Wire. Can you explain the issue why it happen ?
Part Number: LM2674 Hi
Please Provide me the Latest Updated Full Material Declaration for the parts
LM2674M-12/NOPB,
LM2674M-3.3/NOPB,
LM2674M-ADJ/NOPB
as per PCN# 20210427002.1B
The Material Content Page does not have the Updated MD as per the PCN…