Part Number: LM2705 Hello Team,
my customer wants to use LM2705MF in his display application as a backlight driver. They use the driver already in another application:
Since I'm unclear about the functionally of the controller I would like to know if we…
Part Number: LM2705 Other Parts Discussed in Thread: TLV61048 , LM27313 Hi
Is there has a limit for the LM2705 FB pin upper resistance?
For TLV61048 as an example, the upper limit of voltage divider R2 must not exceed 150K ohm. Because this parameter will…
Part Number: LM2705 The datasheet SNVS191F –NOVEMBER 2002–REVISED OCTOBER 2016 - shows a graph on output ripple: Figure 15. Output Ripple Voltage Copt, Ropt Included .
What are Copt and Ropt? I can't seem to be able to find any other references…
Part Number: LM2705 Hi team,
As my customer would like to use two serial lithium battery as power supply, the input voltage range would be 5~7.2V and output voltage is 11V. LM2705 device is recommended because of its low power consumption and small inrush…
Part Number: LM2705 Other Parts Discussed in Thread: TLV61046A , TPS61046 I got data sheet but not found it mentioned about feedback resistor selection.
I reference figure 12, typical 20-V application.
Vin will be 5V from USB port directly.
Vout 13.5V…
Other Parts Discussed in Thread: LM2705 , TPS61251 Which boost regulators have adjustable current limit?
I need a part to boost 5V up to 6V, 50mA output, but I need to limit the input current to less than 150mA.
The LM2705 has a 150mA current limit, but…
Hi Sir,
Thanks for reaching out.
From your design requirement, I don't think LM2705 is suitable for your design. Because the input current is equal to 0.11A*7.5V/(0.85*5V)=0.19A, which is higher than the switch current limit.
Instead, TLV61046A is…
