Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LM27403EVM-POL600 Other Parts Discussed in Thread: LM27403 Tool/software: From a previous post, TI provide me the Gerbers and other fab documentation package LM27403_POL600_SV600821.zip, but this archive does not include the files for the motherboard…
Part Number: LM27402 Other Parts Discussed in Thread: CSD86350Q5D , LM27403EVM-POL600 , TPS53632 , LM27403 Tool/software: I am working on a POL module that can do 12V-1V (and other standard POL output voltages). I like the design in LM27403EVM-POL600 and…
Here is a photo. The board I have is the LM27403EVM-POL600. Since this is a mature device, why does TI provide tools that don't work? And, why doesn't TI clean up conflicting design information?
Thanks,
Other Parts Discussed in Thread: LM27403 , LM27403EVM-POL600 Hi guys,
I design LM27403 Module according to LM27403EVM-POL600 User's Guide but my board consume 100mA current while no load connected to the output and it causes switching Inductor become warm…
Other Parts Discussed in Thread: LM27403 , LM27403EVM-POL600 Hi guys,
I design a board With LM27403 Switching according to its user's guide. my Design is completely match with LM27403EVM-POL600 but my pcb specially inductor become very hot and my output…
Other Parts Discussed in Thread: LM27403 I've got a power supply design, designed almost entirely using Webbench. The DC input voltage is between 15 and 20V, and I need to generate a variety of voltages for my circuit. Webbench proposed stepping the…
I was having the same problem This is what I assembled
It only got up to 100mv under no load but it was stable. When I added a 0.1ohm load it didn't regulate at all.
here is the Design tool exel file 12-01-2015assembly.xlsx
