Part Number: LM3150-250EVAL Other Parts Discussed in Thread: LM3150 , LM25145 , LM5145 Hi Sirs,
I want to measure the loop gain of this Evaluation Board.
is there a dedicated pin for injecting small ac signals?
Best reagards
Part Number: LM3150-250EVAL Other Parts Discussed in Thread: LM3150
Hi Sirs, My customer reports a voltage drop issue on te LM3150-250 EVM with VIN = 24V, RFB1 reworking to 1.18kohm: We can get 12V Vout with no load, however, the Vout drops to 11.2V…
Part Number: LM3150-250EVAL Tool/software: WEBENCH® Design Tools Is it possible to get the Altium design files for the LM3150-250EVAL ( http://www.ti.com/tool/LM3150-250EVAL ) kit ?
Tony
Part Number: LM3150-250EVAL Other Parts Discussed in Thread: LM3150 Hello E2E,
I tried VOP operation for LM3150 on EVM. www.ti.com/.../LM3150-250EVAL I applied a bias of 0.8 V to the FB port. The LM3150 has stopped operating. Please see the attached…
Dear Tim,
regarding the PCB Layout, it would be on the LM3150-250EVAL board.
For Ripple inj. , I take the values from Web DEsigner, see attachend.
But with this values the Jitter becomes alway big.
I tried to reduce the Rr down to 680k Ohm. Then…
Part Number: LM3150-250EVAL Hello,
Please see the attached waveform. LM3150 can't to OVP operation by once OV pulse on FB, the low side FET is be latch ON. This device needs second OV pulse for normally OVP operation. This symptom contradicts the explanation…
Hi Brian,
Since you are using a linear regulator to start with, it sounds like you don't need a lot of features.
Unfortunately this is a lot of power to convert so you will probably need to go with a controller which is more complicated than the…
