Part Number: LM4050QML-SP I have a LM4050QML-SP 5V reference that exhibits a much wider temperature range than what the datasheet says. I am seeing as much 5.047V at -45C and 4.942V at +80C. The 5V Vref trends linearly with temperature and has a negative…
Part Number: LM4050QML-SP Other Parts Discussed in Thread: DAC121S101QML-SP , ADC128S102 Hi Team,
Figure 14 of the datasheet of LM4050QML and Figure 43 of DAC121S101WGRQV show that it can be used as power supply and reference to ADC128S102QML and DAC121S…
Part Number: LM4050QML-SP
Hello,
I am using the LM4050QML-SP in my project and need basic radiation test data. I know TID value was mentioned in the datasheet. I was wondering if there is an SEL result value (MeV) so that I can add to my project's radiation…
Part Number: LM4050QML-SP Other Parts Discussed in Thread: LM4050-N Yes that made things look closer. If you want to see transient information should the "Skip initial transient bias point calculation (SKIPBP)" be checked typically?
Thanks Again…
Part Number: LM4050QML-SP Other Parts Discussed in Thread: ADS1278-SP , , TL1431-SP , ADS1278 , LMP2012 , TINA-TI , DS90C031 , SN55LVDS31
Hi, I want to use LM4050QML-SP (+2.5V) as voltage reference for the ADC ADS1278-SP. Input voltage is +5V and the ADC modulator…
Part Number: LM4050QML-SP Other Parts Discussed in Thread: LM4050-N , HI Folks,
I am interested in using the LM4050 5V reference, and am searching for a spice model for the 5V version. I came across a TI area, but I am not clear which download is the 5V…
Part Number: LM4050QML-SP Hi team,
My customer wants to know if the L M4050QML-SP has a metal lid. If it does, they want to check if the metal lid is internally grounded, or provides a pad for floating, or is floating.
Can you please help and provide if…
Part Number: LM4050QML-SP Hi. Is the lid on this part conductive, or ceramic? and if it is conductive, is it tied internally, or floating?
Thanks,
Eric
Part Number: LM4050QML-SP Are the unused pins (1-4, 6-9) on the LM4050QML-SP connected to anything internally?
Looking at an application where two LM4050 references will be stacked to double the reference voltage. Basically, pin 5 of the upper Ref will…