Part Number: LMR36006-Q1 Other Parts Discussed in Thread: LM46000-Q1 , LMR36006 Hi,
I am working on a design to covert 12/24V DC battery to 6~7V, then through a LDO to 5V to power a MCU. I find out that both LMR36006-Q1 and LM46000-Q1 meet the requirement…
Hi Andy,
I understood what you mean about verifying loop response. I'll apply on feedback circuit of LM46000-Q1.
Also, as I told you, please forward to Youhao my previous post.
Regards, Jeffrey
Part Number: LM46000-Q1 Other Parts Discussed in Thread: SN6501-Q1 1. For the life requirement of energy storage project, the equivalent duration of high temperature working test under working conditions shall be higher than 105 ℃, 10701h or 125 ℃, 5508h…
Part Number: LM46000-Q1 Hi,
I got a problem with the simple switcher LM46000-Q1. When I apply the target input voltage on the Vin pin in one step (0V->24V) the LM46000-Q1 does not work properly. The output voltage reaches only 2V-3V instead of 12V.…
Part Number: LM46000-Q1 Hello team,
Hope you are doing well. Customer is using LM46000A-Q1 in their design and tested the part for 1KV/-1KV. The part did not pass as per the ratings in table 6.2 ESD ratings. Customer is asking if we can verify this…
Part Number: LM46000-Q1 Other Parts Discussed in Thread: LM46000PWPEVM ,
1. We are trying to meet RE102 Ground emissions spec with a LM46000-Q1 switching regulator. Noticed a blank part location between SW and GND on the LM46000PWPEVM evaluation board…
Part Number: LM46000-Q1 Dear all.
There is mention of the A version in the datasheet of LM46000-Q1. The RPGOOD value and optimized for PFM are caught in the difference in A version. What is the point where PFM was improved?
Regards, PAN-M
Hi Tony,
if I understand your request correctly, you are looking for switcher with 300mA output capability that comes with an integrated (auto-source) LDO?
I'm afraid, but the TPS65320-Q1 is the only auto-sourcing part we have and there is no plan…
Part Number: LM5176-Q1 Other Parts Discussed in Thread: LM5176 , LM5175 Dears,
I'd like to request the PCB layout review for two parallel configuration of LM5176-Q1. Please refer to the attached files below.
BMS_PCB Layout.pdf
BMS_LM5176-Q1_Two…
