Part Number: LM46001 Hello,
My customer is considering to use LM46001.
But because they couldn’t find any available samples for LM46001, they got LM46001-Q1(non-A version) samples instead for their 1 st prototype.
Could you tell me the difference…
Part Number: LM46001 Hello,
Could you please submit IMDS report for below components to Kimball Jasper IMDS account 15918. Those are urgently needed for IMDS for ZF and Knorr Bremse application.
Kimball Part#
Supplier name
IMDS…
Part Number: LM46001 Team,
Customer is facing EMI issues on their custom PCB. What can be done to mitigate the problem? Some more details will be posted soon.
A.
Hi Maik,
LM46001 high-side MOSFET body diode will forward conduct if Vout is higher than 0.7V+Vin, the diode current may goes quite high if the input is low impedance, then too high power loss may cause chip damage.
B R
Andy
Part Number: LM46001 Other Parts Discussed in Thread: LM46000 , We have an a few percent of boards failing in the field in the same way as described in the related thread. It appears that the ability for VIN to provide the initial voltage to the LDO in…
Part Number: LM46001 I would like to operate VOUT at 1.8V instead of 3.3V during system inactivity.
The BIAS uses the output for improved efficiency, but requires 3.3V minimum.
Will the LDO automatically switch to VIN when VOUT < 3.3V?
Or do I need…
Part Number: LM46001 Dear support team!
I would like to implement a Soft-Start with the LM46001. Normally it is recommended to use an external capacitor to set the soft-start time.
An internal current source will load this external capacitor until…
Part Number: LM46001-Q1 Hi Team,
LM46001-Q1 was used on customer side. Now they have a Conduction issue when they passing EMI test.
When they try RC on SW pin, it doesn't improve after try may RC value. But when they try to connect a resistance between…
