As the schematic shows, the value of R2 should be 10Ω. However, the actual value on the board is 10KΩ, that causes the demo couldn't start up in low Vin. I've got two demos and both values of R2 are 10KΩ. It must be a mistake during mass production.
Part Number: LM5001 I have an LM5001BSTEVAL eval board. Because of my application, I have 2000uF on the output. At 2 Hz the output is pulsed at 4 amps for 5 mS. Of course the output droops, which is okay, and the LM5001 charges it back up to 48V in like…
