Part Number: LM5035C Tool/software: Hello,
I have a question about SR outputs of LM5035C,
When I want to immediately stop SR1 and SR2 outputs, UVLO voltage need to fall below 1.25V?
If there are any other ways, please let me know.
The following is reference…
Part Number: LM5035C Other Parts Discussed in Thread: UCC2808A-1 , UCC27712 Tool/software: Hi,
Do you have any High-Voltage Half-Bridge Driver with inbuilt Oscillator similar to Part number NCP1392B, manufacturer Onsemi (datasheet attached)?
I am particularly…
Part Number: LM5035C Tool/software: Hello,
We are designing half bridge converter with LM5035C.
The below items are needed to design for us, please us know.
*minimum pulse
Refer to datasheet, minimum dity is 0%. But how long is the minimum on time…
Part Number: LM5035C Hi,
Does LM5035C possible to fulfill below application? Anything reference design can share to us? thank you!
Vin DC24V(18-28V)
VOUT DC48~65V 3.4A
Jeff
Part Number: LM5035C Hello，
In case of no load or heavy load, or in case of low temperature, the module output oscillates. The waveform of the primary switch tube is as shown in the attachment. The commissioning loop does not work. Only reduce the volt…
Part Number: LM5035C Other Parts Discussed in Thread: LM5035
Hello，
If the overvoltage protection function of LM5035 is not used, how to handle OVP pin? Can it be suspended?
Part Number: LM5035C Hello.
I have used LM5035C before for low voltage 48V input power supply, half bridge or push-pull topology.
Now I want to make a high-voltage power supply with 300V input and 24V output of 500W.
I wonder if it can be done with 5035C…
Part Number: LM5035C Other Parts Discussed in Thread: LM5039 , UCC28250 , LM5036 , UCC28251 Hi Team,
Besides the LM5035C, does TI have a push-pull controller with synchronous rectification?
I need a few solutions to reference. thx
Part Number: LM5035C For my design I would like to make the softstart time in the order of magnitude of 100ms. Is there a maximum of the capacitance that can be connected (without resistance) to the SS pin? Is the discharge FET in that case protected…
