Part Number: LM5045EVAL Other Parts Discussed in Thread: LM5045 , LM5110 , UCC27624 Tool/software: Hi,
Greetings,
I am Sonika, a hardware engineer at Applied Electro Magnetics Pvt. Ltd. We are using the LM5045 IC for a DC-DC converter. In the LM5045…
Part Number: LM5045EVAL Other Parts Discussed in Thread: LM5045 Tool/software: Hi,
I would be grateful if you could kindly share the Gerber files for the LM5045 evaluation board.
Best regards, Sonika
Part Number: LM5045EVAL Other Parts Discussed in Thread: TL431 Hi team,
Here is several confusing items of LM5045EVAL design. The feedback network is as following.
1.To simplify the design, could I replace the U4 and it's external compensation network…
Part Number: LM5045EVAL Other Parts Discussed in Thread: LM5045 Hi Team,
I tested LM5045 EVM and found the turning off waveform is abnormal. Below is the test condition and waveform. Can you help check why this issue will happen?
Part Number: LM5045EVAL on our LM5045EVAL we use the Pulse Planartranformer, Typ PA0876.003NL
http://products.pulseelex.com/product-details/pa0876-003nl/266/
Alternativly also the PA3455.002NL could be used.
Do we have data sheets for both transformers…
Hi Govind,
I would look at the device you asked about in this thread, LM5045. It is a full-bridge PWM driver. There is an evaluation board that is similar to your design specs that can give you a jumpstart in your design: LM5045EVAL Evaluation board…
Satoshi-san,
The minimum oscillator freq of the LM25037 is not explicitly stated in the datasheet. However, from Fig. 6 on page 7, it shows that with RT1 = 300 k-ohm, Fosc = ~22 kHz is possible. So I would assume that this is the minimum oscillator…
Hi Wangxin,
Customers take LM5045 standard EVM test found the problem (
), do not have the customer to do the board problem, the customer can't understand why we should continue to capture the waveform, TI should be able to obtain LM5045 EVM and…
