Hello Adam,
You will need DCR in the primary of your transformer. This effects the ripple injection/Stability. Also suggest using an order of magnitude higher values for your FB resistors. I note that your FB R's is setting Vout to 5V, thought you…
Part Number: LM5160A Other Parts Discussed in Thread: LM76002 Hi Ti.
I have used webench software and also calculate the values of the external components based on datasheet but at the real situation on the EVK it gives me insufficient current on the…
Part Number: LM5160A Hi,
I getting the issue with the voltage drop in output when increasing load.
VIN :-- 20 V to 60V
VOUT :- 12V
Iout :- 1.5 A
I have used web bench for designing circuit.
When increasing load, Output voltage drop…
Part Number: LM5160A Hi,
We use LM5160A for flybuck. The input is 9~36VDC and output is 24V. There is a problem is that when the input over 30V, the diode D3 temperature is very high.
Do you have any recommend?
Output: 24V / 35mA
Best…
Part Number: LM5160A Other Parts Discussed in Thread: LM5155 , Hello,
We're looking for an isolation power that could support +/-12V rail with 10W. Could you suggest a suitable part? Thanks.
Input voltage: 13-18V
Output Voltage: +/-12V.
Output…
Part Number: LM5160A Other Parts Discussed in Thread: LM5160 Tool/software: WEBENCH® Design Tools Hi forum,
i used LM5160ADNTT in its isolated configuration with fly-buck topology.
when i used webench, it was recommend me to choose Cout2 (the capacitor…
Part Number: LM5160A Other Parts Discussed in Thread: LM5160 , LM5160-Q1 Hi TI expers,
I designed small FlyBuck converter with LM5160A controller to generate a symmetrical supply rails from 50V DC source. I simulated the circuit and the simulation works…
Part Number: LM5160A Hi,
The circuit using LM5160A but we found that the output unstable because of PMW unstable as the waveform below:
Here is the schematic:
Please help to check that is anything could be modified for this issue, thank you…
Hello,
Yes, you can use a coupled inductor as mentioned. Just ensure that the leakage inductance is reasonablly low and the sat current is above the maximum current limit of the LM5160A. Various magnetic solutions are referenced in the LM5160A documentation…
Part Number: LM5160A Other Parts Discussed in Thread: LM5160 , PMP15032 , PMP , PMP10532 , PMP30227
Hi Team,
customer planning to use LM5160
can the team help support to provide a reference schematic for output +-15V (isolated)
Thanks very …
