Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LM5175EVM-HP Other Parts Discussed in Thread: LM5175 Hi
we need to boost 5v to 12V 12 AMP, whether this EVM support for 5V input
can I use this EVM for 5V input?
(The LM5175 is a synchronous 4-switch buck-boost controller capable of regulating…
Part Number: LM5175EVM-HP Other Parts Discussed in Thread: LM5175QUICKSTART-CALC , LM5175 , LM5177 , LM5122 Hi there,
we are using the LM5175EVM-HP evaluation board for 12V output but now we would like to switch the output to be 18V. L ooking at LM5175EVM…
Part Number: LM5175EVM-HP Hi
We would like to use the LM5175EVM-HP to run the validation for the application (12V/15A). However, we were seeing the switching PWW rising issue and would like to check with you.
We know the LM5175EVM-HP can only support…
Hi Pang, I'd recommend to check LM5176 which is synchronous 4-switch buck boost controller. LM5176 is developed as a higher power version of LM5118 and upgraded version of LM5175. Also please check the LM5175 high power design as an example at www.ti…
Part Number: LM5175EVM-HP Hello I am attempting to make a battery charger based off the TI LM5175EVM-HP board. I am attempting to use this so I can charge a 12V lead acid battery off a variable input. My power source is going to be variable but capable…
Part Number: LM5175EVM-HP Other Parts Discussed in Thread: LM5175EVM , LM5176 Tool/software: WEBENCH® Design Tools I checked the LM5175EVM Inductor temperature when Vin24V and Vin36V both no load.
why the L1(chock) temperature is too high different with webench…
Part Number: LM5175 Other Parts Discussed in Thread: , LM5176-Q1 , , LM5176 Hello There,
We are designing a new product for automotive applications (like ECUs) that is powered by an input source of 6 to 36V, at an Ambient temperature of 65 Degree celcius…
Part Number: LM5175EVM-HP Other Parts Discussed in Thread: LM5175EVM Hi,
My customer is evaluating the LM5175EVM-HP.
Where should the snubber circuit be connected if it places?
Best Regards,
Kuramochi
Part Number: LM5175 Hi expert,
My customer wants to use LM5175 in their USB type C application. They want to know why LM5175EVM-HP has limitation at Vin from 6V to 36V. What limits the Vin minimum and maximum so that it cannot reach IC spec. 3.5V to…
Part Number: LM5175EVM-HP Hi,
I received the following question from my customer.
The switching frequency decrease when the low dropout as follows;
※ The extracting from ": SNVU465"
In this case, does the switching frequency depend on the…
