In your case it sounds like the LM60's output is not being correctly loaded to the ADC.
1) Have you used a voltage source instead of the LM60 at 0.6 V to emulate the sensor? If you observe the correct reading for the ADC using the voltage source…
Part Number: TMP235 Other Parts Discussed in Thread: LM60 , LM62 , LM61 Dear Sir/Madam,
We are using TMP235 SOT-23 (3 pin) package for our design. I can't find any stock anywhere to order. How can I get it?
It is urgent.
Other Parts Discussed in Thread: TPS92630-Q1 , LM60 Hello,
I want to thermally isolate the LED's being driven by the TPS92630-Q1. If I place a LM60 (analog output temp sensor) near the LEDs and wire the output to the TEMP pin of the TPS92630-Q1 can I shutdown…
Part Number: FDC1004 Other Parts Discussed in Thread: LM60 , Hello
We are using the FDC1004, in CAPDAC mode, to measure variable capacitance tactile sensors. The problem we are running into is at roughly 37C+ (measured on the board by LM60) the chip output…
Other Parts Discussed in Thread: LMT90 , LM60 Hi,
In the datasheet for LMT90 there is small mistype.
"7.3.1 LMT90 Transfer Function The LM60 follows a simple linear transfer function in order to achieve the accuracy as listed in Electrical Characteristics…
Thanks for providing more details of the issue you reported.
Frank, I have engaged with the LM60 team to see if this is going to be an issue. They have asked what voltage is supplied to the LM60 VDD pin and when is it sequenced relative to the AM335x power…
I just noticed an inconsistency in the datasheet I will get back to you on this. It may take me a few days. Do you need this information urgently?
I'm just curious why you are interested in the LM60?