Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LM62460RPHEVM Other Parts Discussed in Thread: LM62460 Tool/software: Hi
I'm working with TIDA020047 board, but i need to power on my TIDA020047 with 24V instead of the recommanded input power 12V. so should I modify the refernce design…
Part Number: LM62460-Q1 Other Parts Discussed in Thread: LM62460RPHEVM I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications . A 2k resistor (RF2) appears in parallel with the ferrite…
Hi,
1. You are correct, it should be short and wide, not thin. The short and wide SW node will have lower inductance.
2. That is good to know that the device is regulating at steady load. It would be good to have a SW, IOUT and VOUT waveform at steady…
Hi Daniel,
On my end, I checked the LM62460RPHEVM and measured VCC using the VCC test point and AGND connection.
The VCC ringing that you measured may be a byproduct of SW noise coupling to VCC probe. If you measured both VCC and SW at the same time,…
