Part Number: LM63635-Q1 Hello! We are currently using the LM63635DQDRRRQ1 primary power supply; The specification book mentions this filtering circuit;
Is R 0.51 Ω in this box a resistor that must be used with this resistance value? Do you have any suggestions…
Part Number: LM63635-Q1 Hello Team,
I am looking for the LM63635CAQDRRRQ1 Alitum CAD model, can you please provide it ?
I could only find LM63635DQDRRRQ1.
Many thanks,
BR,
Matisse
Part Number: LM63635-Q1 Hi Team,
Customer is looking to know what the Iq is for the LM63635-Q1 under the following Conditions.
VIN=12V
Vout=5V
MODE pin tied to Ground
Part Number: LM63635-Q1 Hi Team,
As title, may you let me know the parameter of internal MOSFET rise time and fall time? (Rough parameters are ok.)
Vin = 13.5V
Vout = 5V
Iout = 2.5A
Regards,
Roy
Part Number: LM63635-Q1 Hello team, I have a question about Vout line discharge method at power off (except for RFBB and RFBT) because Vout line seems to be high impedance, then I am considering the following method that is used power good (/reset) pin. …
Part Number: LM63635-Q1 Dear team,
We have a question from our customer about reel packaging.
How long tolerance of reel diameter and width for LM63635DQPWPRQ1 is ?
Regarding tape, I heard it is based on IEC 60286-3 previously, so we understand that tolerance…
Part Number: LM63635-Q1 Hello Expert, I have question for LM63635-Q1's switching frequency during drop out mode.
My understanding for the switching frequency during dropout mode @ nominal fsw=2.1MHz is as below.
I think we can divided 3 section from…
Part Number: LM63635-Q1 Hello Expert, I have questions about minimum recommendation for Cff.
Is there any recommendation for Cff?
I think zero from Cff move to higher frequency if Cff value become smaller. So I think there isn't any specific requirement…
Part Number: LM63635-Q1 Hi
Want to ask a question about Iq and Isupply shown below.
The spec below shows same typical value to which when device is in noraml operation. Iq is the VIN current when device is in not switching. Why it is same as the Isupply…
