Part Number: LM73605EVM-5V-2MHZ Hello,
Based on this EVM and using the same schematic, I have designed a board. But the max current rating available without voltage fold back is only 3A. Of course,the layout is not exactly same but the circuit is. Any…
Part Number: LM73605EVM-5V-2MHZ Hello Sir/Madam,
Can you please suggest me the output capacitor and inductor value for 12 to 1.8V output with switching frequency of 2.2Mhz?
Regards, Saikumar
Part Number: LM73605EVM-5V-2MHZ Other Parts Discussed in Thread: LM73605 Hi,
We are planning to use LM73605 in one of our ECU. Before planning to use, we would like to get an EVM for 3.3V output and test it in our lab.
Is it possible to get EVM for 3.3V…
Part Number: LMR23630 Other Parts Discussed in Thread: LMR23625 Hello guys,
One of my customers is considering using LMR23630 for their new products.
They want to see a graph of efficiency vs load current when Fsw=2MHz, Vin=12V and Vout=5V?
Do you have…
Hi Bryce, Well maybe, some issues with other people's designs as long as you are sure that will provide 5A for both cases 5V and 3.3V output for 2.8V--->5V input that is fine. My question now is is it better to use 400Khz or 2Mhz design? Thanks!
Part Number: LMR38020 Tool/software: Hi,
We are using the LMR38020FSDDAR (fixed PWM, spread spectrum variant) to step a rail down from 24V to 5V. We are using the RT_SYNC pin with an external resistor 52.3kR to set the switching frequency to 500kHz. However…
Hi Sir,
The customer is asking the follow your app note to do AVS function, is the TPS62067A-Q1 stable when the PWM Duty at 50%?
Could you please review the schematics and advise some comments? Thanks!
The design condition as below,
Vin = 5V +/-5% Vout…
Part Number: LMG1210 Other Parts Discussed in Thread: LMG1205 , , LMG1020 Hello, TI experts,
Is there any faster 5V (commercial TI) gate drivers than LMG1205 or LMG1210 multi-level hybrid converter PCB design? I feel like the rise/fall times and delay…
Part Number: LM46002 Other Parts Discussed in Thread: LM46001 , LMR43620 , LMR33620 Team,
do we have efficiency data for this device when using 2MHz switching frequency?
Here's my customers spec:
Vin = 8..32V
Vout = 5V
Iout = 1mA..500mA, but in failure…
Hi Hartung,
1. Mode of operation
==> Auto mode : this is the most efficient operation mode at high load current. 2. Frequency
==> 1MHz : 1MHz is more efficient than 500kHz or 2MHz according to the datasheet 3. Output currents you would like to…