Part Number: LM74703-Q1 Other Parts Discussed in Thread: TVS1800 ,
Tool/software:
Hi TI,
Why for 24V battery protection application 58V TVS diode is recommended? Does not such diode have typical clamping voltage of over 90V which far exceeds LM74704 65V…
Part Number: LM74703-Q1 Other Parts Discussed in Thread: LM74704-Q1 , Hello Expert,
Our customer is considering to use LM74703-Q1 or LM74704-Q1.
Then could you please answer following questions?
What is the difference between both devices? As far as I…
Part Number: LM74703-Q1 Tool/software: I would like to voltage OR two inputs using two LM74703s.
The one input is a battery between 9V and 36V.
The other input is a fixed 12V from an AC-DC converter.
According to me I can not use the LM74703 for this…
Part Number: LM74703-Q1 Tool/software: 1. I do not want the LM74703 to regulate the voltage accross a FET to 20mV.
I want to use a FET with a 2.7milli-ohm RDSon at 5A which gives a product of 13.5mV
At higher temperatures, the RDSon will of course increase…
Part Number: LM74700-Q1 Other Parts Discussed in Thread: LM74703-Q1 , Tool/software: Dear Team,
Our customer requires EMC measurements for both LM74703-Q1 and LM74700-Q1 ideally for both 30 MHz to 108 MHz as well as 150 kHz to 1 GHz.
Are you able to provide…
Hi PP,
LM5050-2 will work fine even with 12V rail.
You can also consider using LM74703/4-Q1.
Usage of TPS2411 depends on the input power supply as it has a very tight abs-max rating. If any kind of transients are expected, it can be hard to use.
LM5050…
Hi Shiven,
I understand there is the rating but this chart also have pull-up and pull-down resistor for LM74703-Q1 as 50kohm. Then, could you please tell me which is LM74703-Q1's push-pull output stage configuration?
If left side is used LM74703-Q1…
Hi Jayanthi,
You can either use an ORing configuration using LM74703/4-Q1 that will switchover to 12V supply only when PS1 has fallen to 12V-11mV.
Or you can consider using LM74800-Q1 in priority power MUX configuration in which you can program the switch…
Hi Song
Thanks for reaching out to us.
We don't guarantee the specs mentioned in the datasheet once recommended ratings are crossed since the device is tested till recommended ratings only. Although the device will not be damaged under absolute maximum…
