Part Number: LM9076 Other Parts Discussed in Thread: TPS7A05 , TPS7A16 In the LM9076 Datasheet on page 10, "OUTPUT CAPACITOR" section, the first paragraph says the following:
An output bypass capacitor is required for stability. This capacitance…
Other Parts Discussed in Thread: LM9076 , TPS5420 Dear,
I have problem with C-Delay Capacitor in one of our boards after being used during more than 5 years with similar designs!
Now I'm not understood where the problem comes:
- What happens in our…
Can LM9076S remains fully operational when subjected to bulk current injection signals on the input supply lines?
It does not describe in LM9076S data sheet. like LM9072.
Thanks
Justin
I would like to confirm the threshold voltage for reset (VTHR).
These values are min. 0.83, typ. 0.89 and max. 0.94.
In this case, should we consider the variation of Vout?
And how do we consider " *Vout(Nom) " in Units in the datasheet?
For…
Other Parts Discussed in Thread: LM9076 Hi,
if I don't need the delayed reset function of the LM9076 LDO, can I leave the /RESET and CDELAY-pins unconnected?
Thanks
Other Parts Discussed in Thread: LM9076 Greetings,
For a new design we need to have a second's worth of extra time when the input volts goes down. We are thinking of using the LM9076S-3.3 regulator since it is automotive rated. Is it possible to simply…
Other Parts Discussed in Thread: LM9076 We are using a TI linear voltage regulator for Battery Sync. What I want to know is is it OK to put a 0.1F supercap on the output to keep the Vcc rail up for a second or so after the input voltage is removed. The…
Other Parts Discussed in Thread: LM9076 Dear TI-er.
I want know LM9076(TO-263) Thermal Resistance value.
It is θja 75°C/W(Worst case (FREE AIR) per EIA/JESD51?3).
My condition Vin min 24V ~ max 32V, Vout 5V 70mA, Maximum Ambient Temperature 75…
